- I-Storm ADSL Router With Firewall Built-in User's Manual

Chapter 3

Configuration

I-STORM ADSL ROUTER can be configured with your Web browser. The web browser is included

as a standard application in following operation systems, UNIX, Linux, Mac OS, Windows

95/98/NT/2000/Me, etc. The product provides a very easy and user-friendly interface for

configuration.

3.1 Before Configuration

This section describes the configuration required by LAN-attached PCs that communicate with the I-

STORM ADSL ROUTER , either to configure the device, or for network access. These PCs must have

an Ethernet interface installed properly, be connected to the I-STORM ADSL ROUTER either

directly or through an external repeater hub, and have TCP/IP installed and configured to obtain an IP

address through a DHCP server or a fixed IP address that must be in the same subnet of the I-STORM

ADSL ROUTER . The default IP address of the I-STORM ADSL ROUTER is 192.168.1.254 and

subnet mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP address from

the I-STORM ADSL ROUTER ADSL Router.

Please follow the steps below for PC’s network environment installation. First of all, please check

your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be

installed. If not, please refer to MS Windows relative manuals.

Any TCP/IP capable workstation can be used to communicate with or through the I-

STORM ADSL ROUTER . To configure other types of workstations, please consult the

manufacturer’s documentation.