DiskMaster NASG302D/F301D Dual Bay Gigabit/Fast Network Storage MULTILANGUAGE Quick Start Guide A02-NASG(F)302(1)D_GX01 Where solutions begin ISO 9001:2000 Certified Company
ITALIANO Questo prodotto è coperto da garanzia Atlantis Land On-Center della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 2 years On-Center warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using the Switch, please refer to the online manual.
The award of the information is facultative, but its lack will prevent ATLANTIS LAND® from starting the Guarantee process requested. R Reeggiisstteerr yyoouurr pprroodduucctt!! w ww ww w..aattllaannttiiss--llaanndd..ccoom m Registration on the web site www.atlantis-land.com within 15 days from the purchase of the product dismiss the customer from showing a valid proof of purchase (Sale Receipt or Invoice) in case of the request of intervention.
MULTILANGUAGE QUICK START GUIDE ITALIANO 1.1 Caratteristiche Principali .............................................................9 1.2 Contenuto della confezione ..................................................... 10 1.3 Dove posizionare il DiskMaster ............................................... 10 1.4 DiskMaster Application ............................................................ 11 1.5 I LED frontali ............................................................................ 11 1.
MULTILANGUAGE QUICK START GUIDE 1.9 Hard Disk setup ....................................................................... 44 Single Hard Drive installation ......................................... 45 Dual Hard Drive installation ............................................ 47 1.10 How to login ........................................................................... 49 1.11 Mapping a Network Drive ...................................................... 52 Mapping a Network Drive in Windows XP ..........
ITALIANO AVVERTENZE Abbiamo fatto di tutto al fine di evitare che nel testo, nelle immagini e nelle tabelle presenti in questo manuale, nel software e nell'hardware fossero presenti degli errori. Tuttavia, non possiamo garantire che non siano presenti errori e/o omissioni. Infine, non possiamo essere ritenuti responsabili per qualsiasi perdita, danno o incomprensione compiuti direttamente o indirettamente, come risulta dall'utilizzo del manuale, software e/o hardware.
ITALIANO CE Mark Warning Questo dispositivo appartiene alla classe B. In un ambiente domestico il dispositivo può causare interferenze radio, in questo caso è opportuno prendere le adeguate contromisure. Dichiarazione di Conformità (Contrassegno CE) Con la presente Sidin SpA dichiara che questo Dual Bay NAS è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttive CE 2004/108/EC sulla “compatibilità elettromagnetica” e successive 92/31/ECC e 93/68/EEC.
ITALIANO Utilizzare solo i cavi specifici per le applicazioni. Utilizzare le porte indicate senza forzare. Verificare regolarmente che tutti i cavi di connessione non siano danneggiati. In caso lo fossero sostituirli immediatamente. Verificare che nella prese di collegamento non entrino oggetti e/o cavi estranei. Taluni Hard Disk potrebbero non essere compatibili con i controller dell’apparato. A questo scopo consultare la lista di compatibilità presente sul sito nell’apposita sezione.
ITALIANO Grazie per aver acquistato il DiskMaster. Grazie alla velocità offerta, l’ampia capacità di stoccaggio, la facilità d’uso ed il supporto di numerose applicazioni, il DiskMaster rappresenta la soluzione ideale per ogni necessità di immagazzinamento dati. 1.
ITALIANO DiskMaster, adatto ad un utilizzo sia in casa che in ufficio, rappresenta la soluzione ideale per la sicurezza dei dati a costo contenuto. 1.
ITALIANO 1.4 DiskMaster Applicazione In figura un esempio tipico di applicazione. 1.5 I LED frontali LED INFORMAZIONE PWR(Blu) Acceso quando connesso alla rete elettrica. LINK(Verde) Acceso quando connesso ad un dispositivo Ethernet. ACT(Rosso) Lampeggiante quando vi è trasmissione/ricezione.
ITALIANO 1.6 Le porte posteriori PORTE 1 Ventola 2 RESET UTILIZZO Non ostruire mai la ventola di raffreddamento dell’apparato. Lasciare uno spazio di almeno 10 cm. Dopo che il dispositivo è acceso, premere (per 5 secondi) per effettuare il reset dell’apparato (utilizzare, per esempio, in caso si perdesse la password di accesso).
ITALIANO 3 LAN(RJ45) Connettere con un cavo UTP. 4 USB(V1.1) Connettere la stampante USB per farla diventare una stampante di rete. 5 POWER (jack) Connettere l’alimentatore a questo jack. 6 POWER(ON/OFF) Bottone di accensione/spegnimento. La fase di accensione/spegnimento necessita di circa 3 minuti. 1.7 Settaggi di Default Prima di iniziare la configurazione del DiskMaster è necessario conoscere i settaggi di default.
ITALIANO 1.8 Inserimento dei dischi Seguire le istruzioni seguenti per l’inserimento degli Hard Disk nel DiskMaster. Svitare le viti poste nel pannello posteriore. Rimuovere il pannello in alluminio. Svitare le 4 viti che bloccano il cassetto porta Hard Disk. Inserire delicatamente nella parte bassa del cassetto il primo Hard Disk. Inserire delicatamente nella parte alta del cassetto il secondo Hard Disk. Serrare gli Hard Disk al cassetto usando le viti.
ITALIANO DiskMaster 15
ITALIANO Il modello A06-NASF301D dispone della sola interfaccia SATA I/II.
ITALIANO DiskMaster 17
ITALIANO 1.9 Formattazione degli Hard Disk A questo punto è necessario formattare il disco rigido (o i dischi rigidi) inserito nel DiskMaster. Per accedere alla configurazione del DiskMaster è possibile utilizzare l’utility fornita a corredo (cliccare 2 volte sul campo Selection sul nome del prodotto) oppure usare il browser WEB digitando l’indirizzo IP dell’apparato (nell’esempio l’IP di default 192.168.1.1). Premere il tasto invio. Utilizzare admin (come nome utente) e atlantis (come password).
ITALIANO Formattazione di un Hard Disk Una volta effettuato l’accesso nella sezione WEB del DiskMaster verrà mostrata la seguente schermata: Cliccare su Maintenance, quindi nel sottomenu Disk Utility. Cliccare, una volta scelta la tipologia di formattazione e la cifratura (se attivata), su Format per iniziare. Una volta terminata la formattazione il sistema effettuerà un riavvio.
ITALIANO questo processo prima di fare alcunché. Il Diskmaster supporta un complesso sistema per la cifratura dei dati sull’HD. L’algoritmo utilizzato è AES a 128bit ed èattivabile solo se la formattazione scelta è EXT2. La chiave utilizzata deve essere esattamente di 20 caratteri. Il Diskmaster supporta, per i drive non in modalità array, 3 differenti file system: EXT2, EXT3 e FAT32. Il file system EXT2 garantisce le migliori performance e caratteristiche (la sola a garantire la cifratura).
ITALIANO Formattazione in configurazione con 2 Hard Disk Una volta effettuato l’accesso nella sezione WEB del DiskMaster verrà mostrata la seguente schermata: Cliccare su Maintenance, quindi nel sottomenu Raid Settings. Cliccare, una volta scelta la tipologia (RAID o JBOD), su Create Raid System per iniziare. Questa sezione è disponibile solo nel caso in cui 2 Hard Disk vengano installati nell’apparato.
ITALIANO La formattazione e/o il cambiamento da una modalità RAID ad un’altra distruggerà, in maniera irreparabile, tutti i dati presenti sull’Hard Disk. Accertarsi di aver effettuato il backup dei dati importanti prima di procedere. La creazione del RAID è un processo che potrebbe richiedere diverso tempo (anche alcune ore). E’ opportuno attendere che il dispositivo abbia terminato questo processo prima di fare alcunché.
ITALIANO 1.10 Configurazione del DiskMaster via Utility La configurazione avanzata del DiskMaster può avvenire utilizzando l’interfaccia WEB dell’apparato ed un browser, digitando l’indirizzo IP del diskmaster. Per conoscere questo indirizzo IP (di default è 192.168.1.1) ed effettuare una configurazione rapida è possibile utilizzare l’utility fornita a corredo. Seguire attentamente i punti sotto riportati: Acceddere il DiskMaster ed accertarsi che sia correttamente collegato alla rete LAN.
ITALIANO configuration manually oppure Automatically obtain an IP Address (DHCP)). Cliccare poi su Next. Selezionare il fuso orario, data ed ora e cliccare su Next.
ITALIANO A questo punto verrà mostata una schermata riassuntiva delle caratteristiche appena impostate. Cliccare su Back per cambiare nuovamente i settaggi impostati, cliccare invece su Save per confermare (e poi su OK). Alternativamente è possibile effettuare la configurazione guidata attraverso l’interfaccia WEB.
ITALIANO 1.11 Connessione di rete Creazione della Connessione Remota in Windows XP In Windows XP è possibile creare la connessione di Rete operando come segue: Start->Pannello di Controllo Cliccare sul menu Strumenti e poi Connetti unità di Rete Cliccare su Sfoglia, poi selezionare sotto WorkGroup il nome precedentemente attribuito all’apparato (DiskMaster nel caso di default) e poi la cartella Guest-Share e cliccare su OK. Spuntare la voce Riconnetti all’avvio, come in Figura.
ITALIANO Cliccare poi su Fine. A questo punto è possibile accedere al disco inserito nel DiskMaster (utilizzando la cartella Guest-Share) come fosse un disco del proprio PC. Per ulteriori dettagli su una configurazione avanzata fare riferimento al manuale completo presente su CD. In caso di problemi è possibile forzare direttamente l’indirizzo IP dell’apparato per la mappatura di un’unità di rete usando la sintassi: \\Indirizzo IP \guest-share nel campo cartella. Cliccare poi su Fine.
ITALIANO Creazione della Connessione Remota in Windows Vista In Windows Vista è possibile creare la connessione di Rete operando come segue: Start->Computer Cliccare su Connetti unità di Rete Cliccare su Sfoglia, poi selezionare il nome precedentemente attribuito all’apparato (DiskMaster nel caso di default) e poi la cartella Guest-Share e cliccare su OK. Spuntare la voce Riconnetti all’avvio e cliccare poi su Fine.
ITALIANO 1.12 Risoluzione dei problemi Questo capitolo illustra come identificare e risolvere eventuali problemi sul DiskMaster. A.1 Utilizzare i LED per la diagnosi dei problemi I LEDs sono un utile strumento per individuare eventuali problemi, osservandone lo stato è possibile individuare velocemente dove si verifica un eventuale malfunzionamento. A.1.1 LED Power Il LED PWR non si accende Steps Azione Correttiva Accertarsi che l’alimentatore sia connesso al DiskMaster ed 1 alla rete elettrica.
ITALIANO Ciò cancellerà tutte le configurazioni eseguite dall’utente e ripristinerà la password di default. Premendo il pulsante “Reset” presente nel pannello posteriore del prodotto per 5 (o più) secondi, il DiskMaster riporterà tutte le impostazioni ai valori iniziali. 2 Le configurazioni di Default del DiskMaster sono: 3 Username: admin Password: atlantis Indirizzo IP: Ottenuto via DHCP, (Qualora non sia disponibile in rete un server DHCP l’indirizzo IP sarà 192.168.1.1 e Subnet Mask 255.255.
ITALIANO Steps 1 2 Azione correttiva La modalità FAT32 non supporta funzionalità RAID. Riformattare gli Hard Disk in modalità EXT2 o EXT3. Attenzione tutti i dati verranno irrimediabilmente persi col cambio di formattazione. Perché alcuni menu riportati nel manuale non sono disponibili a video? Steps Azione correttiva Molte funzionalità richiedono che sia installato un Hard Disk. 1 Per talune funzionalità (RAID) è necessario installare 2 Hard Disk.
ITALIANO Quali protocolli sono utilizzati dal DiskMaster per il servizio di condivisione di file? Steps Azione correttiva L’apparato integra un server SAMBA (basato su SMB, Server 1 Message Block) per il file sharing. In altre parole se il PC utilizza il protocollo IP può accedere ai file condivisi. Alternativamente il server FTP integrato permette di ottenere le stesse funzionalità (sul PC deve però essere presente un FTP client).
ENGLISH Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VIsta are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land.
ENGLISH Safety Information Only qualified personnel should carry out technical work on the device. When cleaning, avoid using cleaning sprays and any kinf of solution containing alcohol or other flammable liquids. Avoid overheating. This may reduce the life of the device. Protect your device from humidity, direct sunlight as well as high and extremely low temperatures. Do no place any liquids on or close to the unit.
ENGLISH Thank you for purchasing the DiskMaster storage solution. With speed, ease of use, high capacity, and support for numerous applications, DiskMaster is the ideal solution for all of your data storage needs. 1.1 An Overview of the DiskMaster Securely access all of your multimedia, music and data files on your local LAN or through Internet.
ENGLISH away with the need to have a computer connected to it, and allowing you to share it with the rest of the users in the office or at home. 1.2 Package contents Unpack the package and check all the items carefully. Also, keep the box and packing materials in case you need to ship the unit in the future.
ENGLISH 1.4 DiskMaster Application When you have completed the steps in this Quick installation Guide, your connected network should look similar to this: 1.5 The Front LEDs The following figures illustrate the connector locations for the DiskMaster. LED MEANING PWR(Blue) Lit when power ON. LINK(Green) Lit when connected to Ethernet device.
ENGLISH ACT(Red) Flashes when sending/receiving data. 1.6 The Rear Ports PORT 1 MEANING FAN Leave at least 10cm of space at the rear of the device for ventilation.
ENGLISH 2 RESET 3 LAN(RJ45) 4 USB(V1.1) 5 POWER (jack) 6 POWER(ON/OFF) After the device has turned on (turn on the power and wait 3 minutes), press and hold reset button for 5 seconds, then release it to reset it (this is used when you can not login to the DiskMaster, e.g. forgot the password. Please use the Ethernet cable to connect the DiskMaster to network. Please use the USB printer cable to connect the device’s USB port (fro printe server). Connect the supplied power adapter to this jack.
ENGLISH 1.8 Hardware Installation Following is a quick installation guide to get you up and running. For further details on each of the settings, please refer to manual on CD. Release two screws from the back side. Remove the aluminium plate. Release the 4 screws in the Hard Disk Mount. Place the first Hard Disk in to lower mont. Place the second Hard Disk in the upper area. Fasten all Hard Disk screws. For SATA Hard Disk: connect both power cable and data cable in to Hard Disk.
ENGLISH DiskMaster 41
ENGLISH DiskMaster 42
ENGLISH Dual Interface (SATA I/Il and EIDE) is available only on A06-NASG302D.
ENGLISH 1.9 Hard Disk setup If the hard disks are being installed for the first time, you need to initialize the disks before you can use them. Follow the steps described below. Open the web browser, enter the local port IP address of this DiskMaster, which default at 192.168.1.1, and click Go to get the login page. The default username is admin, password atlantis and click “OK” to continue.
ENGLISH Single Hard Drive installation The following illustrates the layout of the Web-based Configuration Tool main screen. This page allows you to format the physical hard disks into DiskMaster. Click on Maintenance then Disk Utility. Select the mode for the NAS system to partition and format disks. Select, in the combo box, the system file (EXT2 / EXT3 / FAT32), EXT 3 is recommend. Press Format to start formatting (it may require some times; do not perform other jobs during hard drive formatting).
ENGLISH When the settings are made, the DiskMaster system starts formatting the disks. This procedure will destroy all the data on the disks. Make sure You have backed up any important data on the disks before the format process. It may require some times; do not perform other jobs during hard drive formatting The DiskMaster supports 128bit loop-AES encryption for the EXT2 file system.
ENGLISH Dual Hard Drive installation The following illustrates the layout of the Web-based Configuration Tool main screen. This page allows you to format the physical hard disks into DiskMaster. Click on Maintenance then Raid Settings. In this section you can manage the RAID array and set up your drives. The DiskMaster supports RAID 0 and RAID 1. Two hard drives of identical capacity and make are required. Please Select the RAID mode (RAID 0, RAID 1 or JBOD) then Create Raid Systems.
ENGLISH If only one drive is installed, the RAID configuration will not be available. Creating the RAID system will take several hours, depending on HDD capacity. Do not turn off the power or interrupt the system in any other way during this process! We recommend using the EXT2 file system for optimum performance and functionality. Changing the RAID setup will require you to re-format the drives.
ENGLISH disk can operate independently and is seen as an individual disk. Therefore, the total capacity of JBOD is the sum of the capacities of each disk. This allows the user to add disks until the desired total capacity is reached. Since JBOD provides no performance increase and data protection, it is seldom used. 1.10 How to login To configure your DiskMaster , you will need to use the web browser, enter the IP address and then use the web configuration for further setup.
ENGLISH Before you can access the device, you will have to enter the admin password. The default login is admin/atlantis, so enter admin for the password and press OK to login. You can define the name (Server Name) for your device and set up the IP configuration. When set, press Next to continue.
ENGLISH Set time zone, current Date and Time. Click Next.
ENGLISH you can compare your new settings with the previous configuration. If you find a mistake, go back to make changes but if everything is OK, press Save, then OK. Alternatively, you could also simply write down the IP address in the first step of the setup wizard and then access the web configuration interface via your web browser. Input the IP address in the URL field of your web browser, hit the Enter key, enter admin for the username, once more admin for the password and then login.
ENGLISH Select Reconnect at Logon. Then click Finish. Once the drive has been mapped, you are able to find and access it under My Computer. This link will still be there even after rebooting your Operating System.
ENGLISH In event of problem, please write directly the IP (instead of name) in the folder name. Please write: \\IP address\guest-share. Then click Finish. Mapping a Network Drive in Windows Vista Start->Computer Click on Map Network Drive. Follow the setup wizard and fill in the path to your DiskMaster. Alternatively, you can also browse for the shares by clicking on the Browse button and locating the folder that way (choose guest-share folders). Select Reconnect at Logon then click Finish.
ENGLISH If event of problem , please write directly the IP (instead of name) in the folder name. Please write: \\IP Address\guest-share. Then click Finish. 1.12 Troubleshooting This chapter covers potential problems and the corresponding remedies. A.1 Using LEDs to Diagnose Problems The LEDs are useful aides for finding possible problem causes. A.1.1 Power LED The PWR LED on the front panel does not light up.
ENGLISH A.2 Login: Username and Password I forgot my login username and/or password. Steps 1 2 3 Corrective Action If you have changed the password and have now forgotten it, you will need to upload the default configuration file. This will erase all custom configurations and restore all of the factory defaults including the password.
ENGLISH 4 Reset the device. A.4 General Why Can’t I perform RAID function under FAT32 format? Steps Corrective Action FAT32 format doesn’t support RAID functions. 1 To perform RAID functions please use EXT2 or EXT3 format. 2 Some of the functions and menus are not available! Steps Corrective Action Many of the functions require a hard drive to be installed. 1 Make sure you have at least one HDD installed and formatted in EXT2 or EXT3.
ENGLISH Does the NAS support Hard disk Power Management? Steps Corrective Action The NAS uses standby mode for power management (Sleep 1 time), if there is no any activity ranging 5-60 min. You can go to web base > Disk Utility > Set Sleep Time function (0 to disable function, range 5-60 to enable function.
APPENDIX A APPENDIX A: Technical Features (A06-NASG302D) Protocols LAN port USB A Port LED Indicators Hard Disk Supported System Format: CPU Sharing Protocol Advanced Features External buttons Input Power Power Consumption Agency and Regulatory Dimensions Weight Operating Temperature Storage Temperature Operating Humidity IP, NBNS(“NetBios” Name Server), Microsoft Networks (CIFS/SMB), DHCP Server/Client, SNTP Client, NTP 1 x RJ45 10/100/1000 Base-T port USB V1.
APPENDIX B APPENDIX B: Technical Features (A06-NASF301D) Protocols LAN port USB A Port LED Indicators Hard Disk Supported System Format: CPU Sharing Protocol Advanced Features External buttons Input Power Power Consumption Agency and Regulatory Dimensions Weight Operating Temperature Storage Temperature Operating Humidity IP, NBNS(“NetBios” Name Server), Microsoft Networks (CIFS/SMB), DHCP Server/Client, SNTP Client, NTP 1 x RJ45 10/100/ Base-T port USB V1.
Atlantis Land Via Pelizza da Volpedo, 59 20092 Cinisello Balsamo – MI – Italy info@atlantis-land.