Instructions / Assembly

3
JUNCTION BOX MOUNTING
OPTIONS
Your new ceiling fan will require a grounded
electrical supply line of 120 volts AC, 60 Hz
circuit. The outlet box must be securely
anchored and capable of withstanding a load
of at least 45 lbs.
Figures 1,2 and 3 are examples of different
ways to mount the outlet box.
Note: You may need a longer down rod to
maintain proper blade clearance when
installing on a steep, sloped ceiling. (Fig. 3)
To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Fig. 4.
Figure 1
Outlet box
Outlet box
Figure 2
Provide strong
support
Recessed
outlet box
Figure 3
Ceiling
hanger
bracket
ANGLED CEILING
MAXIMUM 24
°
ANGLE
11. To reduce the risk of personal injury, install the supplementary mounting means and use only
the hardware provided with the fan.
12. Warning: TO REDUCE THE RISKS OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
A. Use this unit only in the manner intended by the manufacturer. If you have any questions,
contact the manufacturer.
B. Before installing, servicing or cleaning unit, switch power off at service panel and lock
service panel to prevent power from being switched on accidentally.
13. Warning: To reduce the risk of fire, electrical shock or personal injury, mount to outlet box
marked acceptable for fan support and use screws provided with outlet box.
Outlet box
Figure 4