Instructions / Assembly

7. MAKE THE ELECTRIC
CONNECTIONS
Remember to disconnect the power. Follow the
steps below to connect the fan to your
household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors
with electrical tape. Make sure there are no
loose strands or connections.
1. Connect the fan supply (black) wire to the
black household supply wire as shown in Figure
6.
2. Connect the neutral fan (white) wire to the
white neutral household wire. (Fig. 10)
3. Connect the fan ground wire (green) to the
household ground wire.
4. After all splices are made, check to make
sure there are no loose strands. As an
additional precaution we suggest to secure the
plastic wire connectors to the wires with
electrical tape.
Figure 10
White (neutral)
Green or bare
copper (ground)
White ("AC IN N")
Ground (green)
(Connect to ground wire
on hanger bracket if no
house ground wire exists.)
Outlet box
Black ("AC IN L")
Black (motor)
6