Instructions / Assembly

7
8. FINISHING THE
INSTALLATION
Step 1. Move fan motor into position over the
four mounting holes and secure with the four
screws provided. The safety support is provided
to prevent the fan from falling. Secure the safety
cable securely onto the hook. (Fig. 11)
Step 2. Raise up decrotive ring and line up the
four tabs with the four grooves on the motor
housing. Once lined up, slide the decrotive ring
up to the motor housing until snug. (Fig. 12)
Figure 11
Figure 12
Screws
Motor
Safety cable
Decorative ring