AtlonA 1x9 HDMI™ Splitter with CAT5 Outputs User’s Manual MODEL: AT-HD19SS MODEL: AT-HDRS MODEL: AT-HD15SRS Rev.
TABLE OF CONTENTS 1. Introduction ......................................................................... 1 2. Features ........................................................................ 2 3. Package Contents ........................................................................ 2 4. Specifications ........................................................................ 3 5. Panel Description ........................................................................ 4 6.
INTRODUCTION Atlona Technologies AT-HD19SS 1x9 HDMI™ splitter is the perfect solution for those who want to display a single source on 9 or more displays using just single Cat5 or Cat6 cable for each display. The Atlona splitter has 8 x RJ45 (Cat5/Cat6), one for each display and 1 x HDMI™ output to be used for local monitoring or a loop-out for cascading multiple splitters. AT-HD19SS is capable of HDTV resolutions up to: 1080p@130ft and 1080i@200ft.
FEATURES HDMI™ 1.3c compliant HDCP compliant Allow unlimited cascading Regenerate the HDMI™ signal Support audio output Support default HDMI™ EDID and record the EDID of displays Extend up to 15m (50ft) of input HDMI™ cable Extend up to 15m (50ft) of output HDMI™ cable Extends up to 60m (200ft) (1080i) of output CAT5 cable Extends up to 40m (130ft) (1080p) of output CAT5 cable Easy installation The length depends on the characteristics and quality of the cables.
SPECIFICATIONS Technical Role of usage AT-HD19SS AT-HDRS AT-HD15SRS 1x9 splitter [TX] Receiver [RX] Receiver [RX] HDMI™ compliance HDMI 1.3c ™ HDCP compliance Yes Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 36-bit color HDMI™ over CAT5/6 transmission Audio support 1080p - 40m (130ft) [CAT5e] / 50m (165ft) [CAT6] 1080p - 15m (50ft) 720p/1080i - 50m (165ft) [CAT5e] / 60m (200ft) [CAT6] 720p/1080i - 25m (80ft) Surround sound (up to 7.
PANEL DESCRIPTION AT-HD19SS 1 1 3 2 2 3 4 5 4 5 1. +5V DC: Connect to a 5V DC power supply unit here 2. HDMI IN: Connect to the HDMI™ source here 3. HDMI OUT: Connect to a HDMI™ display here for local monitoring or cascade to another HDMI™ splitter such as AT-HD14SS or AT-HD19SS 0 = [Video] – supports up to HDMI™ 1.3 output. [Audio] – supports up to 7.1ch output 1 = [Video] – supports up to HDMI™ 1.3 output. [Audio] – locks to stereo audio output 2 = [Video] – locks to HDMI™ 1.2 output.
INSTALLATION AT-HD19SS Broadcasts HDMI™ signals to 8 remote displays and one local display 1. Switch off all devices, including monitors. 2. Connect a local HDMI™ display to the HDMI OUT port of the AT-HD19SS 3. Connect the HDMI™ source such as a Blu-ray Disc player to the HDMI IN port. 4. Connect to the receivers (AT-HDRS or AT-HD15SRS) via Cat-5/5e/6 cables on the RJ-45 HDMI SIGNAL OUTPUT1 ~ OUTPUT8 ports. 5. Plug in the 5V 4A DC power supply unit. 6. Power on the HDMI™ monitors. 7.
AUDIO/VIDEO SETTING & EDID LEARNING Audio/Video Setting 1. If you cannot get the audio/video output from the connected display for the first time setup. Please follow the instructions below to check if the splitter is OK: Step 1 – Please set the rotary arrow at Mode 5 for Safe Mode, and wait for the green LED SIGNAL on the front panel to blink for a couple seconds. Step 2 – Please dial the rotary arrow counterclockwise [ ] from Mode 5 to Mode 3.
NOTICE 1. When adjusting the signal level on the receiver unit, please dial the rotary control switch from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! 2. If the DVI or HDMI device requires the EDID information, please use AT-DVISync EDID Reader/Writer to retrieve and provide DVI or HDMI display EDID information. 3.
SAFETY INFORMATION Avoid excessive humidity, sudden temperature changes or temperature extremes. Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture. Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements and swimming pools. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. Use only accessories recommended by ATLONA to avoid fire, shock or other hazards.
WARRANTY WARR ARRANTY 1. LIMITED WARRANTY Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the Product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
ATLONA PRODUCT REGISTRATION WARR ARRANTY Thank you for purchasing this Atlona product — we hope you’ll enjoy it. We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firm- ware updates. At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure.