4K HDR 8×8 HDMI to HDMI Matrix Switcher AT-HDR-H2H-88MA Atlona Manuals 8x8 HDMI Switcher
Version Information Version Release Date Notes 1 April 2018 Initial release 2 May 2019 Added note for new front panel OSD to Panel Description 3 Dec 2019 Added USB Updating instructions AT-HDR-H2H-88MA 2
Welcome to Atlona! Thank you for purchasing this Atlona product. We hope you enjoy it and will take a extra few moments to register your new purchase. Registration only takes a few minutes and protects this product against theft or loss. In addition, you will receive notifications of product updates and firmware. Atlona product registration is voluntary and failure to register will not affect the product warranty. To register your product, go to http://www.atlona.
Atlona, Inc. (“Atlona”) Limited Product Warranty Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service.
Atlona, Inc. (“Atlona”) Limited Product Warranty • Damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Atlona to make such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product.
Important Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCT THE RISK OF ELECTRIC SHOCK DO NOT OPEN ENCLOSURE OR EXPOSE TO RAIN OR MOISTURE. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the product.
Table of Contents Introduction 8 Features 8 Package Contents 8 Panel Description 9 Installation Control Audio Mounting Instructions Connection Instructions Connection Diagram 10 10 10 11 13 13 WebGUI 14 IR Remote Control 19 USB Updating 20 Appendix Specifications 21 21 AT-HDR-H2H-88MA 7
Introduction The Atlona AT-HDR-H2H-88MA is an 8×8 HDMI matrix switcher for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps.
Panel Description 1 2 AT-HDR-H2H-88MA 1 R L 2 R L 3 R L 4 R 2 3 4 5 R L 6 R L 7 R L 8 5 6 7 8 OSD Front panel OSD will display the on screen menu for routing, EDID management, and device info. NOTE: Starting on firmware 1.0.13, the front panel LCD will turn off after 30 seconds of inactivity. Press any button to activate the LCD again.
Installation Control A 5-pin captive screw connector for control has been included. The first three terminals are RS-232 control, the last two terminals are for IR. 1 Use wire strippers to remove a portion of the cable jacket. 2 Remove at least 3/16” (5 mm) from the insulation of each wire. 3 Insert the wires into the correct terminal on the included captive screw connector, as shown below. 4 Tighten the screws to secure the wires.
Installation Mounting Instructions The AT-HDR-H2H-88MA can be placed freestanding on top of a desk, a table, or in a cabinet. To prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been included. Rack installation 1 Remove the front two case screws from the sides of the case. 2 Attach the included rack ears to each side of the AT-HDR-H2H-88MA using the case screws. 3 Install the HDR-H2H into a rack, using four rack screws.
Installation Surface mounting The AT-HDR-H2H-88MA can be placed freestanding on top of a desk, a table, or in a cabinet. To prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been included. 1 Turn the unit upside down. 2 Install each foot using the included feet screws, the rubber grips of the feet should be facing up during installation. 3 Turn the unit right-side up and place it in the desired location.
Installation Connection Instructions 1 Connect up to 8 HDMI sources to the HDMI IN ports. 2 Connect up to 8 HDMI displays to the HDMI OUT ports. 3 For control, connect to the captive screw port for IR and RS-232, or the LAN port for TCP/IP and webGUI. 4 Connect the included 24V power supply to the DC 24V port. 5 Connect the power supply to an AC outlet.
WebGUI The AT-HDR-H2H-88MA includes a built-in webGUI, which allows easy management and control of all features. Follow the instructions below to access the webGUI. 1 View the IP address of the unit using the front panel OSD. • Press the FNC button. • Press button 6 (INFO). The firmware version will display on the front panel screen. • Press button 6 again to bring up the IP address.
webGUI 7 Select I/O Settings from the top menu. Output Input Selection - Select the input to route to the output. Output Name - The outputs have the option for labeling to help make routing and switching simpler. Label each output individually. Type the name in the box, and press save. Input HDCP Settings - Toggle HDCP reporting between compliant (on) and non-compliant (off). Input Name - The inputs have the option for labeling to help make routing and switching simpler. Label each input individually.
webGUI 8 Select RS-232 from the top menu. RS-232 Parameter Setting Console - Select the baud rate, data bit, parity, and stop bit. Default baud rate, data bit, parity, and stop bit is 1152000, 8, None, and 1. 9 Select EDID from the top menu. EDID Settings Input - Select the EDID from the drop down list. EDID Saved Save from - Save the output’s EDID to memory to be loaded to the inputs.
webGUI 10 Select Config from the top menu. Web & Telnet Login Settings Password - Update the admin password then press Save. All User Login Settings Username & Password - Add extra users for control and login. 11 Select System from the top menu. Network IP Mode - Switch between static and DHCP modes. IP, Netmask, Gateway, Telnet Port - This will display the current IP settings on DHCP. When set to static, fill in the IP address, netmask, gateway, and telnet port.
webGUI System Power - Toggles the unit between on and standby. Lock - Lock and unlock the front panel keys. IR - Turns the IR window on the front of the unit on and off. Reset to Default - Select to set the unit back to the original factory settings. Firmware Update - Press Choose File to search the local PC for the most recent firmware file. Press Update once the file is selected.
IR Remote Control The AT-HDR-H2H-88MA comes with an IR Remote Control for easy routing. Power On - Turn the unit on. Power Off - Set the unit into standby mode. Power On Output - Select the number key for the corresponding output port for routing. Off Output 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Input 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Input - Select the number key for the corresponding input port for routing.
USB Updating The HDR-H2H can be updated through the FW port on the back of the unit, if the webGUI is not available for updating. Requirements: R L 7 • New firmware - Downloaded from atlona.com • AT-HDR-H2H-XX • Computer running Windows • USB-A to USB mini-B cable 1 Connect power to the HDR-H2H. 2 Press and hold the CANCEL button on the front panel, while connecting the USB-A to USB mini-B cable from the computer, to the FW port on the rear of the unit.
Appendix Specifications Video UHD/HD/SD 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.
Appendix Weight Pounds Kilograms Device 8.
atlona.com • 408.962.0515 • 877.536.3976 © 2017 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.
Installation Guide AT-HDR-H2H-88MA 4K HDR 8×8 HDMI to HDMI Matrix Switcher AT-HDR-H2H-88MA The Atlona AT-HDR-H2H-88MA is an 8×8 HDMI matrix switcher for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps.
Installation Guide AT-HDR-H2H-88MA Panel Descriptions 1 AT-HDR-H2H-88MA POWER ENTER FNC CANCEL 1 R L 2 R L 3 R L 4 R L 5 R L 6 R L 7 R L 8 2 3 4 HDMI IN 2 3 3 4 7 8 EDID INFO 5 6 7 7 8 8 RX TX 1 2 3 4 HDMI OUT 5 6 5 3 1 2 6 R AUDIO OUT 1 1 5 6 4 L 2 Function Buttons Power - Sets the unit in and out of standby. Enter - Used for making selection within the front panel OSD. FNC - Use to switch number buttons to their secondary function.
Installation Guide AT-HDR-H2H-88MA Audio Connect to an audio DSP, amplifier, or other audio distribution or player devices. Only unbalanced connections may be used. L Ground R - Signal Ground L - Signal NOTE: Audio is directly de-embedded from the HDMI IN ports and are not zone output audio ports. R Unbalanced Mounting Instructions The AT-HDR-H2H-88MA can be mounted in a standard 19-inch rack or placed freestanding on top of a desk or table. Rack installation 1.
Installation Guide AT-HDR-H2H-88MA 3. Install the HDR-H2H into a rack, using four rack screws. NOTE: Increase the air flow as needed to maintain the recommended temperature inside the rack. NOTE: Do not exceed the maximum weight loads for the rack. Install heaver equipment in the lower part of the rack for stability.
Installation Guide AT-HDR-H2H-88MA Installation 1. Connect up to 8 HDMI sources to the HDMI IN ports. 2. Connect up to 8 HDMI displays to the HDMI OUT ports. 3. For control, connect to the captive screw port for IR and RS-232, or the LAN port for TCP/ IP and webGUI. 4. Connect the included 24V power supply to the DC 24V port. 5. Connect the power supply to an AC outlet. WebGUI The AT-HDR-H2H-88MA includes a built-in webGUI, which allows easy management and control of all features.
Installation Guide AT-HDR-H2H-88MA Au di o Connection Diagram Vi Matrix Mutli-zone Amplifier Au di o o de CH4 CH3 CH2 CH8 CH1 CH7 POWER CH6 CH5 Vi o de Blu-ray Player di o Vi Au Vi de o I 0 o de di Au o 4 22 OK -44M R-H2H AT-HD BOX SET-TOP Vi o de IR IN RS-232 DC 24V S RX Set-Top Box TX FW LAN C tro on l Display T4 4 OUTPU 3 2 3 Media Player 8 1 7 6 T1 5 OUTPU ENTER INFO 2 POWER EDID L 1 CANCE FNC IN HDMI Vi Display o de Automation Control System A -88M
Installation Guide AT-HDR-H2H-88MA Troubleshooting Problem Solution I am not receiving multichannel audio or 3D video. • By default, multichannel audio and 3D will not pass unless all devices support those features. Set each port’s EDID through the front panel, webGUI, or RS-232. What firmware am I on? • To view the device firmware version, press the FNC button, followed by button 4 (INFO). The firmware will appear on the front panel OSD.
Installation Guide AT-HDR-H2H-88MA Version 1 atlona.com • 408.962.0515 • 877.536.3976 © 2017 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.