User`s manual

4
PANEL DESCRIPTION
Input Panel
CAT5/6/7 INPUT: Connect to the RJ45 port on the Sender unit such as AT-HD-V40SS, AT-
HD14SS, AT-HD19SS, AT-HD50SS, AT-HD50RSL, AT-DVI40SRS with a solid Cat5/5e/6/7
UTP/STP cable
+5V DC: Connect to 5V DC power supply unit.
Input Panel
CAT5/6/7 OUTPUT: Connect to the RJ45 port on the Receiver unit such as AT-HDRP, AT-HD-V40RS,
AT-HDRS, AT-HD15SRS, AT-DVI15SRS, and AT-DVI40RS with a solid Cat5/5e/6/7 UTP/STP
cable
EQ: Dial the 8-level signal equalization control to the received HDMI signals. The HDMI signal level
varies from MAX (strongest) to MIN (weakest) for respective transmission length from longest
possible range to short distance. Always dial the EQ from MIN to MAX and stop turning the rotary
switch whenever the audio/video is playing normally. Inappropriate EQ setting may cause
overpowering issues that would shorten the product’s life significantly!