User Manual CV/SV/PC/HD/HDMI 1080p Scaler Box AT-LINE-PRO2 atlona.
TABLE OF CONTENTS 1. Introduction .................................................. 2 2. Features .................................................. 2 3. Package Contents .................................................. 2 4. Operation Controls and Functions .................................................. 3 4.1 Front Panel .................................................. 3 4.2 Rear Panel .................................................. 4 4.3 OSD Operation ...............
INTRODUCTION Atlona Scaler Box is designed to upscale digital/analog video signal from Composite, S-Video, PC, Component (HD) and HDMI input sources, to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p and WUXGA (1920 x 1200.) Besides video upscaling, the scaler box also converts digital/analog audio signal to digital format, then output either through HDMI combining with the video, or Coaxial S/PDIF separately.
OPERATION CONTROLS AND FUNCTIONS 4.1 Front Panel 1 2 3 4 5 6 1. POWER Button and LED Indicator: Press the button to turn ON/OFF the power of the unit. The LED will illuminate when the power is turned on. 2. IR remote control sensor. 3. Input Selection Buttons and LED Indicators: Press each of the buttons (CV/SV/COMP/PC/HDMI) to select the desired input source. The LED will illuminate when the corresponding input is selected. 4.
4.2. Rear Panel 2 1 4 3 7 5 6 8 9 1. HDMI OUT and CO-AX OUT: Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect the CO-AX OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output. 2. AUX IN Input: When the video signal input through the HDMI IN port is from a DVI source such as a PC, use the AUX IN port to input the audio signal. 3.
4.3. OSD Operation 1st Tier Option VIDEO COLOR OUTPUT OSD 2nd Tier Option PICTURE MODE CONTRAST BRIGHTNESS HUE SATURATION SHARPNESS SCALE NR EXIT COLOR TONE RED GREEN BLUE EXIT - INFORMATION HPOSITION VPOSITION TIMER TRANSP EXIT SOURCE DELAY SOUND EXIT - EXIT - AUDIO atlona.
4.4. Remote Control 1. POWER: Press the button once to power on the AT-LINE-PRO2. Press again to enter standby mode. 2. INPUT: Press the button repeatedly to toggle through various input sources. 3. HD Input: Press the button to directly select component input. 4. PC Input: Press the button to directly select PC input. 5. HDMI/DVI Input: Press the button to directly select DVI (or HDMI) input. 6. Output Resolution: Press any one of the button to directly select output resolution.
LINE-PRO2 RS-232 REMOTE CONTROL PROTOCOL * The connection between AT-LINE-PRO2 and remote controller with RS-232 modem cable. Pins definition of modem cable AT-LINE-PRO2 PIN Definition 1 NC 2 TxD 3 RxD 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC Remote Controller PIN Definition 1 NC 2 RxD 3 TxD 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC * RS-232 transmission format: Baud Rate: 19200 bps Data Bit: 8 bits Parity: None Stop Bit: 1 bi atlona.
(A) Set Commend: Command Code S POWER 0 S POWER 1 S SOURCE 0 S SOURCE 1 S SOURCE 2 S SOURCE 3 S SOURCE 4 S OUTPUT 0 S OUTPUT 1 S OUTPUT 2 S OUTPUT 3 S OUTPUT 4 S OUTPUT 5 S OUTPUT 6 S OUTPUT 7 S OUTPUT 8 S OUTPUT 9 S OUTPUT 10 S OUTPUT 11 S OUTPUT 12 S OUTPUT 13 S OUTPUT 14 S OUTPUT 15 S OUTPUT 16 S OUTPUT 17 S OUTPUT 18 S SIZE 0 S SIZE 1 S SIZE 2 S SIZE 3 S SIZE 4 atlona.
Command Code S PICTURE MODE 0-3 S CONTRAST 0-100 S BRIGHTNESS 0-100 S HUE 0-100 S SATURATION 0-100 S SHARPNESS 0-100 S NR 0-3 S PCHPOSITION 0-100 S PCVPOSITION 0-100 S PCCLOCK 0-100 S PCPHASE 0-63 S COLORTEMP 0-3 Response > PICTUREMODE STANDARDUSER > CONTRAST 0-100 > BRIGHTNESS 0-100 > HUE 0-100 > SATURATION 0-100 > SHARPNESS 0-100 > NR OFF-HIGH > PCHPOSITION 0-100 > PCVPOSITION 0-100 > PCCLOCK 0-100 > PCPHASE 0-63 > COLORTEMP NORMAL-USER S RED 0-100 S GREEN 0-100 S BLUE 0-100 SOSDHPOSITION 0-100 S OSDVPO
(B) Status Commend Command Code R POWER R SOURCE R OUTPUT R SIZE R PICTUREMODE R CONTRAST R BRIGHTNESS R HUE R SATURATION R SHARPNESS R NR R PCHPOSITION R PCVPOSITION R PCCLOCK R PCPHASE R COLORTEMP R RED R GREEN R BLUE R OSDHPOSITION R OSDVPOSITION R OSDTIMEOUT R OSDBACKGROUND R AUDIOMUTE R AUDIODELAY atlona.
SPECIFICATIONS 6.1. General Specification • • • • • • Frequency bandwidth: 1.65Gbps (single link) Input Ports: Composite x 1 / L7R x 1 S-Video x 1 / L/R x 1 Component (3 RCA) x 1 / UR x 1 PC D-Sub (15-pin) x 1 / 3.5mm Phone Jack x 1 HDMI x 1 / 3.5mm Phone Jack x 1 (for DVI) Coaxial (S/PDIF) x 1 Output Ports: HDMI x 1 Coaxial (S/PDIF)x1 5V DC power supply Dimensions: 215(W) x 154(D) x 47(H)mm Weight: 1 Kgs 6.2.
CONNECTION AND INSTALLATION Resetting the device to original settings: While the unit is plugged in to the Power Supply: 1. 2. 3. 4. Press and hold the MENU button. Unplug the Power Supply from the backand wait 5 seconds. Plug the Power Supply back in and release the MENU button. The unit should now be reset to its default settings atlona.
SAFETY INFORMATION Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Atlona, Inc. (“Atlona”) Limited Product Warranty Policy Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service.
Disclaimers This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products will not become obsolete nor does it imply Atlona products or their electronic components will remain compatible with any other current product, technology or any future products or technologies in which Atlona’s products may be used in conjunction with.