Installation Guide

ManualsBrandsAtlona ManualsHome Theater NetworkingAtlona - Omega Series Scaler for HDBaseT and HDMI - Black

Installation Guide

AT-OME-RX21

Omega 4K/UHD Scaler for HDBaseT and HDMI

AT-OME-RX21

1 x AT-OME-RX21

2 x Captive screw connector, 5-pin

1 x Captive screw connector, 3-pin

4 x Mounting screws

1 x Pair rack mount ears

1 x 24V DC power supply

1 x IEC power cord

1 x Installation Guide

Package Contents

The Atlona AT-OME-RX21 is an HDBaseT receiver and 4K/UHD scaler with a local HDMI

input. Part of the Omega™ Series of integration products for modern AV communications and

collaboration, the OME-RX21 receives HDBaseT for video up to 4K/60 4:2:0, plus embedded

audio, control, and Ethernet over distances up to 330 feet (100 meters). The HDMI input supports

video up to UHD/60 4:4:4. The OME-RX21 is HDCP 2.2 compliant and features 4K/60 upscaling

and downscaling with frame rate conversion. The OME-RX21 is ideal for 4K presentation

applications with Omega, HDVS-200, or UHD-EX Series transmitters, as well as Atlona AV

presentation switchers with HDBaseT outputs, local HDMI sources, and the Gain™ Series

ampliers.

IMPORTANT: Visit https://atlona.com/product/AT-OME-RX21 for the latest rmware

updates and User Manual.

Summary of content (8 pages)

PAGE 1
Installation Guide AT-OME-RX21 Omega 4K/UHD Scaler for HDBaseT and HDMI AT-OME-RX21 The Atlona AT-OME-RX21 is an HDBaseT receiver and 4K/UHD scaler with a local HDMI input. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-RX21 receives HDBaseT for video up to 4K/60 4:2:0, plus embedded audio, control, and Ethernet over distances up to 330 feet (100 meters). The HDMI input supports video up to UHD/60 4:4:4. The OME-RX21 is HDCP 2.
PAGE 2
Installation Guide AT-OME-RX21 Panel Descriptions 1 2 3 4 5 6 AT-OME-RX21 PWR LINK OMEGA TM DEVICE IP INPUT PATTERN HDMI IN 7 FW 8 AT-OME-RX21 L + + HDBaseT IN 9 R IP MODE 1 OUTPUT 10 11 12 1 PWR LED Illuminates green when receiving power. 2 DEVICE IP button Press to display the unit IP in the top left corner of the connected display. 3 INPUT button Use to switch between the HDMI and HDBaseT inputs.
PAGE 3
Installation Guide AT-OME-RX21 RS-232 A 5-pin captive screw connector has been included for RS-232. RX TX GND RX TX 1 GND RX TX 2 NOTE: Port 1 is for display control and port 2 will control the unit. Pin out will be determined by the RS-232 cable and connect as RX (receive), TX (transmit) and (Ground). Ground will be shared between port 1 and port 2. Audio Connect to an audio DSP, amplifier, or other audio distribution devices.
PAGE 4
Installation Guide AT-OME-RX21 Mounting Instructions The AT-OME-RX21 includes two mounting brackets and four mounting screws, which can be used to attach the units to any flat surface. 1. Remove the top 2 case screws on the side of the unit. 2. Align the mounting brackets to the side of the units. 3. Use the previously removed case screws to secure the mounting bracket to the enclosure. 4. Repeat the steps for the other side of the unit.
PAGE 5
Installation Guide AT-OME-RX21 Cable Recommendation Guidelines Refer to the tables below for recommended cabling when using Altona products with HDBaseT. The green bars indicate the signal quality when using each type of cable. Higher-quality signals are represented by more bars. Core Shielding CAT5e Solid UTP (unshielded) CAT6 CAT6a CAT7 N/A STP (shielded) Performance Rating (MHz) 350 500 600 800 IMPORTANT: Stranded or patch cables are not recommended due to performance issues. Cable Max.
PAGE 6
Installation Guide AT-OME-RX21 IP DHCP By default, the AT-OME-RX21 is set to DHCP mode. In this mode, when the AT-OME-RX21 is connected to the Local Area Network (LAN), it will automatically be assigned an IP address by the DHCP server (if available). Press the DEVICE IP button to show the IP address in the top left corner of the display. Static If no DHCP server is available, or a static IP is required, the OME-RX21 can be set to static IP mode using the IP mode button.
PAGE 7
Installation Guide AT-OME-RX21 AMS 2.0 For easy configuration of Atlona devices , AMS 2.0 is available from https://atlona.com/ams for free. Two options can be used for installation: The free Linux based software download or the easy to install server hardware (AT-AMS-HW). Once AMS has been set up: 1. Open a browser on the same network as AMS 2.0 and go to the IP address of AMS 2.0. View the AMS 2.0 installation instructions on how to find the IP address of the software. 2.
PAGE 8
Installation Guide AT-OME-RX21 Version 1 Toll free US International atlona.com • 877.536.3976 • 41.43.508.4321 © 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.