User Manual 8 X 5 HDMI MATRIX SWITCH WITH 5 X CAT5 RECEIVERS INCLUDED AT-PROHD85M-SR Toll free: 1-877-536-3976 Local: 1-408-962-0515 www.atlona.
TABLE OF CONTENTS 1. Introduction .................................................. 2 2. Package Contents .................................................. 2 3. Features .................................................. 2 4. Specification .................................................. 3 5. Panel Description .................................................. 3 5.1 Main Unit .................................................. 3 5.1.1. Front Panel ........................
INTRODUCTION The Atlona AT-PROHD85M-SR is an HDMI 8X5 matrix switch which allows up to eight HDMI sources to be independently switched to five HDMI displays. It extends sources such as Blu-Ray, X-Box or a Satellite receiver up to 165ft @ 1080p and 1920x1200 resolutions to each remote video display. It offers full pass through for all Digital audio formats such as Dolby True HD, DTS-HD Master Audio. You can control the AT-PROHD85MSR matrix by IR, RS-232, RS485, TCP/IP or from the front panel.
SPECIFICATIONS Operating Temperature Range Operating Humidity Range Input DDC Signal Video Format Supported Audio Format Supported Output Video Maximum distance for RJ45 outputs Power Consumption Dimensions Weight (main unit) -5 to +35°C (-41 to +95 °F) 5 to 90% RH (no condensation) 12V (matrix) and 5V (receivers) HDTV up to 1080p and computer up to 1920 x 1200 Pass through for all digital audio formats up to and including Dolby True HD and DTS-HD Master Audio HDMI + HDCP 1.
2. Rear Panel 2 4 7 9 10 11 8 1 1. HDMI inputs 1-4 2. RJ45 CAT5 outputs 1-4 3. HDMI inputs 5-8 4. RJ45 CAT5 output 5 5. 12V power input 6. IR TX emitter ports 1-8 5 3 6 7. IR Ext port (extension) 8. Internal EDID dip switch 9. RS485 port 10. TCP/IP port 11. RS-232 port HDMI Receiver (5 x Receivers included) Note: Please make sure when connecting Cat5e-1 and -2 receiver ports that they are matched to the corresponding RJ45 Ports on the AT-PROHD85M-SR.
CONNECTION AND OPERATION AT-PROHD85M-R AT-PROHD85M-R RX RX 2xCAT5e cable 2xCAT5e cable 1. Connect HDMI sources such as Blu-Ray, DirecTV or Apply TV to the inputs on the AT-PROHD85M-SR. 2. Connect 2 RJ45 CAT5 cables from each output on the AT-PROHD85-SR to the matching numbered inputs on the supplied receivers. It is important that that each end of the CAT5 cable matches the corresponding numbered RJ45/CAT5 port on the matrix & receiver. For EDID set up you must use a dual CAT5 cable connection.
Note: A single CAT5 connection can be used in systems not requiring IR extension through the supplied receivers. If a single CAT5 connection is utilized the embedded EDID setting choice from the dip switch will be the default for all connected devices. For a single CAT5 connection please use the RJ45-2 ports only. 3. EDID configuration: There are three options to consider for EDID configuration.
Dip Switch Settings DS1 DS2 DS3 DS4 CAT5 Output Connection and EDID 0 0 0 0 Auto EDID and Copy EDID 1 0 0 0 Dual CAT5, 1080p, 2ch audio 1 0 0 1 Single CAT5, 1080p, 2ch audio 1 0 1 0 Dual CAT5, 1080p, 5.1ch audio 1 0 1 1 Single CAT5, 1080p, 5.1ch audio 1 1 0 0 Dual CAT5, 1080p, 7.1ch audio 1 1 0 1 Single CAT5, 1080p, 7.1ch audio 1 1 1 0 Dual CAT5, 1080i, 2ch audio 1 1 1 1 Single CAT5, 1080i, 2ch audio C). Copy EDID: Please set the dip switch to “0000” (off).
5. If you wish to control the AT-PROHD85M-SR from a 3rd party control system connect an RS-232 cable between the matrix and the control system. Please use a straight RS-232 Cable for this connection . (View RS232 codes on page 12) 7. For computer control connect a RJ45 cable to the TCP/IP port of the AT-PROHD85M-SR. Note: If the TCP/IP port is connected directly to a computer you must use a crossover CAT5 cable. If connect¬ed to a router use a straight wire CAT5 cable. 8.
CONNECTION AND OPERATION Note: If the TCP/IP port is connected directly to a computer you must use a crossover CAT5 cable. If connected to a router use a straight wire CAT5 cable. Running NETCTL for the first time will create a file on your desktop called “NETCTL.TXT”. This file will contain information for the matrix switch such as MAC, Subnet, Gateway and IP address. 1. Open the NETCTL application. It will automatically search for any connected devices and display the IP address.
Select one of the 1~8 square buttons to select an input for each 1~5 output. The left side pane shows the input status for each output. 3. If “Assign IP” is displayed the device was not assigned an IP address automatically. Double click on “Assign IP” to manually assign an IP address for the matrix. Select “OK” to assign the new IP address. Next select “Search” and then “Read Device” to display the matrix name. RS232 9.1.
9.2. RS232 Cable Wiring AT-PROHD85M-SR Pin Definition 1 NC 2 Tx 3 Rx 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC Remote control device Pin Definition 1 NC 2 Rx 3 Tx 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC 9.3. RS232 Commands: Note: ‘ ’ is carriage return.
OUTPUT Output 3 OUTPUT Output 4 OUTPUT Output 5 Toll free: 1-877-536-3976 Local: 1-408-962-0515 COMMAND cir 20 cir 21 cir 22 cir 23 cir 24 cir 25 cir 26 cir 27 ACTION Output 3 select Input1 Output 3 select Input2 Output 3 select Input3 Output 3 select Input4 Output 3 select Input5 Output 3 select Input6 Output 3 select Input7 Output 3 select Input8 COMMAND cir 30 cir 31 cir 32 cir 33 cir 34 cir 35 cir 36 cir 37 ACTION Output 4 select Input1 Output 4 select Input2 Output 4 select Input3 Output 4 se
SAFETY INFORMATION Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
WARRANTY Limited Warranty Atlona Technologies warrants that (a) its products (the AT-PROHD85M-SR) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
ATLONA PRODUCT REGISTRATION Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates. At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure.