- TOSHIBA Internal Modem User's Guide V.9256K

89
S-Registers
AT command set result codes
5.375 x 8.375 ver 2.4.0
CONNECT 57600 EC
*
18 Connection at 57600 bps
(DTE rate)
CONNECT 115200 EC* 87 Connection at 115200 bps
(DTE rate)
CONNECT 32000 EC
*
70 Connection at 32000 bps
CONNECT 34000 EC
*
71 Connection at 34000 bps
CONNECT 36000 EC
*
72 Connection at 36000 bps
CONNECT 38000 EC
*
73 Connection at 38000 bps
CONNECT 40000 EC
*
74 Connection at 40000 bps
CONNECT 42000 EC
*
75 Connection at 42000 bps
CONNECT 44000 EC
*
76 Connection at 44000 bps
CONNECT 46000 EC
*
77 Connection at 46000 bps
CONNECT 48000 EC
*
78 Connection at 48000 bps
CONNECT 50000 EC
*
79 Connection at 50000 bps
CONNECT 52000 EC
*
80 Connection at 52000 bps
CONNECT 54000 EC
*
81 Connection at 54000 bps
Command Set Result Codes Table (Continued)
Result Code Numeric Description
* EC appears only when the Extended Result Codes
configuration option is enabled. EC is replaced by one of the
following symbols, depending upon the error control method
used:
V.44 - V.44 data compression with V.42 error control
V.42bis - V.42 error control and V.42bis data compression
V.42 - V.42 error control only
MNP 5 - MNP class 4 error control and MNP class 5 data
compression
MNP 4 - MNP class 4 error control only
NoEC - No error control protocol