We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. Howeve r, if you have any problems with your new product, DO NOT RETURN IT TO THE STORE, please contact us toll free @: 1-888-996-2729 FAX: 1-866-873-3531 gameroom@escaladesports.com Or write to: Escalade Sports Customer Service Department P.O. Box 889 Evansville IN 47706 Please have your model number when inquiring about parts.
IMPORTANT! READ EACH STEP IN THIS MANUAL BEFORE YOU BEGIN THE ASSEMBLY. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS ATOMIC PLATINUM 9FT SHUFFLEBOARD Tools Required: T1-Allen Wrench (Included) Phillips Screwdriver Furniture Polish and Cloth Assembly Tips Make sure you understand the following tips before you begin to assemble your table. 1. Start all bolts by hand before tightening. 2. Some drawings or images in this manual may not look exactly like your product.
HARDWARE IDENTIFIER ( To Scale) H1 - 3.5mm x 38mm Phillips Washer Head Screw (54 pcs) H4 - 5mm x 35mm Phillips Round Head Screw (8 pcs) H2 - 4mm x 44mm Phillips Flat Head Screw (4 pcs) H5 - 5mm x 32mm Phillips Round Head Screw (8 pcs) (Not to Scale) H7 - 8mm x 19mm Flat Washer (12 pcs) H3 - 4mm x 12mm Phillips Round Head Screw (16 pcs) H6 - 8mm x 44mm Allen Head Bolt (12 pcs) ! WARNING: CHOKING HAZARD Small parts. Not for children under 3 yrs.
PARTS IDENTIFIER ( Not to Scale) P1 - Side Rail Apron (2 pcs) P2 - End Rail Apron (2 pcs) P3 - Playfield (1 pc) P4 - Playfield Middle Support Brace (2 pcs) P5 - Playfield End Support Brace (2 pcs) P6 - Leg (4 pcs) P7 - Leg Panel (4 pcs) P8 - End Rail Apron Support Brace (4 pcs) P9 - Leg Leveler (4 pcs) P10 - Corner Post (4 pcs) All Rights Reserved.
PARTS REQUIRED: 16 pcs - H3 Phillips Round 2 pcs - P2 End Rail Apron Head Screw 4 pcs - P10 Corner Post 2 pcs - P1 Side Rail Apron STEP 1: On a clean level surface, place each Side Rail Apron P1, each End Rail Apron P2, and each Corner Post P10 upside down as shown in Figure 1. Next, attach each Corner Post using Phillips Round Screws H3. NOTE: Make sure Corner Post is in this position for correct assembly. P10 Figure 1 P1 P2 P10 P10 P1 NOTE: These assemblies are being built upside down.
PARTS REQUIRED: 2 pcs - P4 Playfield Middle 8 pcs - H5 Phillips Round Support Brace Head Screw 2 pcs - P5 Playfield End Support Brace STEP 3: Attach each Playfield Middle Support Brace P4 and Playfield End Support Brace P5 using Phillips Round Head Screws H5 into side apron as shown in Figure 3.
PARTS REQUIRED: 12 pcs - H6 Allen Head Bolt 4 pcs - P9 Leg Leveler 12 pcs - H7 Flat Washer 1 pc - T1 Allen 4 pcs - P6 Leg Wrench STEP 5: Attach Leg P6 using Allen Head Bolts H6 with Flat Washer H7 as shown in Figure 5. Next, Thread Leg Levelers P9 to bottom of Leg P6 as shown in Figure 5. Do not tighten Bolts H6 at this time.
THIS STEP REQUIRES TWO OR MORE ADULTS. VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY. PARTS REQUIRED: 4 pcs - H2 Phillips Flat Head Screw 2 pcs - P11 Slide Scorer STEP 7: With the help of another adult carefully lift and rotate table into an upright position. Install Slide Scorers P11 using Phillips Flat Head Screws H2 as shown in Figure 7 (Note the location of the pilot holes). Next, use a level to confirm if the table is level.
Congratulations ! Yo u hav e no w assemble d you r gam e table . Pleas e not e t h e Car e an d Us e instruction s belo w t o insur e man y year s o f t roubl e fre e us e o f you r gam e table . TO PLAY THIS GAME AND ACHIEVE A HIGH SKILL LEVEL REQUIRES A SOFT AND GENTLE TOUCH. OVER THROWING THE PUCKS WILL CAUSE DAMAGE TO THE END OF THE TABLES. CARE AND USE OF YOUR TABLE 1. Always shake shuffleboard wax before applying to table. 2.
90 DAY LIMITED WARRANTY consumer warranty extends to the original consumer purchase of any ESCALADESPORTS Product (hereinafter referred as the "Product"). WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of 90 days from the original purchase.
Nosotros tratamos de asegurarnos que nuestros productos sean de la más alta calidad y libre de problemas, como defectos de fabricación ó partes incompletas. Sin embargo, Si usted tiene algún problema con su producto, por favor NO LO REGRESE A LA TIENDA pongase en contacto con nosotros llamando gratis al: 1-888 -996-2729 FAX: 1-866-873-3531 gameroom@escaladesports.com O escriba a: EscaladeSports Departamento de Atención al Cliente P.O.
IMPORTANTE! LEA TODOS LOS PASOS DE ESTE MANUAL ANTES DE COMENZAR A ARMAR. IMPORTANTE! LOS DIBUJOS DE ESTE MANUAL PUEDEN HABERSE EXAGERADO O MODIFICADO PARA MOSTRAR LOS DETALLES. SE REQUIEREN DOS (2) ADULTOS PARA ENSAMBLAR ESTA MESA Herramientas necesarias: Llave Allen T1 (incluida) Desarmador Phillips Abrillantador para muebles y un paño Consejos de ensamblamiento Asegúrese de que comprende los siguientes consejos antes de comenzar a armar la mesa. 1.
IDENTIFICADOR DE TORNILLOS (A escala) H1 - 3.5mm x 38mm Tornillo Phillips con Rondana (54) H4 - 5mm x 35mm Tornillo Phillips (8) H2 - 4mm x 44mm Tornillo Phillips Cabeza Plana (4) H5 - 5mm x 32mm Tornillo Phillips (8) H3 - 4mm x 12mm Tornillo Phillips (16) H6 - 8mm x 44mm Tornillo Allen (12) (No a Escala) H7 - 8mm x 19mm Rondana (12) T1 - Llave Allen (1) IDENTIFICADOR DE ACCESORIOS (No a Escala) A2R-Disco Rojo (4) A2B-Disco Azul (4) A1- Cera para la superficie Todos los derechos reservados.
IDENTIFICADOR DE LAS PARTES (No a Escala) P1 - Riel Lateral (2) P4 - Tabla de Soporte Central (2) P7 - Panel (4) P10 - Esquinero (4) Todos los derechos reservados.
Partes Requeridas: 16 pzas - H3 Tornillo Phillips 2 pzas - P1 Riel Lateral 2 pzas - P2 Riel del Extremo 4 pzas - P10 Esquinero PASO 1: En una superficie nivelada y limpia, coloque boca abajo cada Riel Lateral P1, cada Riel del extremo P2, y cada Esquinero P10, como se muestra en la Figura 1. Posteriormente, adjunte cada esquinero con Tornillos Phillips H3. NOTA: Asegúrese de que el poste esquinero este en esta posición para el ensamble correcto.
Partes Requeridas: 2 pzas - P4 - Tabla de soporte 8 pzas - H5 - Tornillos Central Phillips 2 pzas - P5 - Tabla de soporte del extremo PASO 3: Coloque cada Tabla de Soporte Central P4 y Tabla de Soporte Lateral P5 utilizando los tornillos Phillips H5 dentro del Riel Lateral como se muestra en la Figura 3.
PARTES REQUERIDAS PASO 5: 12 pzs 12 pzs 4 pzs 4 pzs 4 pzs - H6 Tornillo Allen - H7 Rondana - P6 Pata - P9 Nivelador - T1 Llave Allen Instale las patas P6 usando Tornillos Allen H6 con Rondana H7 como se muestra en la Figura 5. Despues, Atornille los Niveladores P9 en las Patas P6 como se muestra. No apriete lost tornillos todavia.
ADVERTENCIA ESTE PASO REQUIERE DE DOS O MAS ADULTOS. CON MUCHO CUIDADO VOLTEE LA MESA SOBRE SUS PATAS. TENGA MUCHO CUIDADO PORQUE LA MESA ESTA MUY PESADA. Partes Requeridas: 4 pzas - H2 Tornillo Phillips (Cabeza Plana) 2 pzas- P11 Contador PASO 7: Con la ayuda de otros adultos levante cuidadosamente y gire la mesa en posición vertical. Instale contadores P11 utilizando los tornillos Phillips de cabeza plana H2 como se muestra en la Figura 7 (Tenga en cuenta la ubicación de los orificios de guía).
Felicidades! Ahora ya ha terminado de ensamblar su mesa. Por favor, Siga las instrucciones del uso y el cuidado de su mesa abajo mencionadas, para garantizar muchos años sin problemas en el juego de su mesa. ADVERTENCIA PARA JUGAR EL JUEGO Y ALCANZAR UN ALTO NIVEL DE HABILIDAD REQUIERE DE UN TOQUE SUAVE Y DELICADO. LANZAMIENTOS BRUSCOS DEL DISCO PUEDE CAUSAR DAÑOS A LOS EXTREMOS DE LA MESA. CUIDADO Y USO DE SU MESA 1. Siempre agite shuffleboard antes de aplicar la cera a la mesa. 2.
GARANTÍA LIMITADA POR 90 DÍAS ® Esta garantía es aplicable para consumidores de la compra original de cualquier producto ESCALADE SPORTS (en adelante denominado el "Producto"). DURACIÓN DE LA GARANTÍA: Se garantiza este Producto al comprador original por un período de (90) días a partir de la fecha de compra.