User manual Owner manual

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
37
Forward Delay time in which the interface takes to converge from blocking stage to
forwarding state. This option only shows in the AP Client mode.
 Maximum Signal Distance is used to determine how fast a wireless signal should be
timed out. If AW5500 is equipped with an outdoor antenna to reach further distances,
increase this value accordingly.
 Fast Handoff is the Atop proprietary protocol to speed up roaming between AW5500s.
Enable to allow AW5500 to share its neighboring AW5500 information to SW550X to
further reduce its roaming time.
 Wireless Isolation creates a firewall between wireless clients connected to this AP. The
isolation can be enabled to prevent data traffic flowing between clients to increase client
security and to prevent unnecessary traffic between clients.
 20/40 MHz Coexistence allows AW5500 working in 40MHz to fall back to 20MHz when
there are 20MHz only clients in the wireless network. The AP will also fall back to 20MHz
when the channel within the +-40MHz frequency range has been occupied.