User manual Owner manual

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
45
AW5500 provides two SNMP fields, which are “System Contact”, usually used to specify the
device’s contact information in case of emergency; and “System Location”, usually used to
specify the device location.
If you wish to make the device information available for public viewing/editing, Enable the
SNMP function. Fill in the passphrase for the “Read Community”, the group that is allowed to
read the device information and fill in the passphrase for the “Write Community”, the group
that is allowed to read/modify the device information. By default AW5500 comes in public for
Read Community and private for Write Community. In case the device raises an alert due to
any unexpected incident, a message will be dispatched to a SNMP trap server. Specify the IP
Address of the SNMP Trap Server designed to collect all alert messages; any changes made
will take effect after the device is restarted.