User manual Owner manual

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
60
4.11.4 Firmware Upgrade
Updated firmware is provided by our company from time to time (for more information visit our
News & Events webpage), to fix bugs and optimize performance. It is very important that the
device must NOT be turned off or powered off during the firmware upgrading, (please be
patient as this whole process might take up to 7 minutes). Before upgrading the firmware,
please make sure that the device has a reliable power source that will not be powered off or
restarted during the upgrading process. To upgrade a new firmware, once downloaded, copy
the new firmware file to your computer, and then click “Browse” to find the new firmware file,
then click “Upload”. The program will show the upload status, please wait until the uploading
process is finished (the amount of time varies depending on the equipment used); the device
will then proceed to restart itself (Figure 4.35).
Figure 4.35
Note: if the firmware upgrade process fails and the device becomes unreachable, follow the TFTP Recovery procedure
on the Appendix.