User manual Owner manual

Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
80
6.2 Basic WDS Setup
The following figure illustrates two sites with some considerable distance apart. Ethernet
cabling is impossible to the adjacent site. The adjacent site has both wireless clients and
Ethernet clients. Note that if the Access Point function is not required at the adjacent site (no
wireless clients), WDS Hybrid can be changed to WDS Station.
Figure 6.2
For more information on how to configure your AW5500 for this topology, please refer to WDS
Bridge Mode.
Note: wireless coverage is dependent on the environment.