User Manual

4 | P a g e
Assembling the Revo Red
• Fit the hose on the vacuum cleaner by
inserting the rotating hose connection into
the vacuum cleaner until you hear a click.
To remove the hose, press the button at
the side of the hose connection and then
pull it out.
• Fit the telescopic tube into the other end of
the hose.
• Adjust the length of the telescopic tube by
pushing the locking mechanism down and
pulling in the bottom section of the tube to
a suitable length. When parking, shorten
the tube as far as possible.
• Fit the floor brush into the telescope tube.
Floor Nozzle
The floor nozzle has two settings. When
cleaning hard surfaces (wood, tile etc.), the
brush bristles should be extended. When
cleaning carpets and mats, the brush bristles
should be retracted into the nozzle. Press the
brush change button to switch between the
two settings.
Crevice Nozzle
For radiators, corners, base boards, etc.
Upholstery Nozzle
For furniture, curtains, drapes, etc.