User Manual

PREPARING THE VACUUM CLEANER

1. Fit the hose on the vacuum cleaner by inserting

the rotating hose connection into the vacuum

cleaner until you hear a click. To remove the

hose, press the button at the side of the hose

connection and pull it out.

2. Assembling the telescopic wand and accessories

2.1: Fit the telescopic wand into the other end of the hose.

2.2: Adjust the length of the telescopic wand by pushing

the locking mechanism down and pulling in the

bottom section of the wand to a suitable length.

When storing, shorten the wand as far as possible.

2.3: Fit the floor brush or other accessory into

the telescopic wand.

Floor Brush Combo

The floor brush has two settings. When cleaning

hard surfaces(wood flooring, flooring tiles, etc.),

the floor brushes should be extended. When cleaning

carpets and mats, the brushes should be retracted into

the floor brush. Press the brush change button to switch between

the two settings.

Crevice Tool/Brush

For radiators, corners, skirting, etc.