- ATTO FibreBridge Installation & Operations Manual

ATTO Technology, Inc. ATTO FibreBridge Installation & Operation Manual
- 35 -
ATTO Technology, Inc.
Default Address Translation
The default Address Translation method should be sufficient for most configurations.
For devices connected to FibreBridge SCSI Bus 1:
SCSI Target ID 0 1 2 3 4 5 6 7
Translated into Fibre LUN 0 2 4 6 8 10 12 14
For devices connected to FibreBridge SCSI Bus 2:
SCSI Target ID 0 1 2 3 4 5 6 7
Translated into Fibre LUN 1 3 5 7 9 11 13 15
If this mapping is not acceptable, the translation can be modified using FibreBridge Services. Refer to the
BridgeTools manual and Appendix A for details.