Specifications

Gear shift pedal
This ATV is equipped with a semi-automatic
4-speed transmission. The gear shift pedal
is located on the left side of engine. Push
down the gear shift pedal to change the gears
as 3
→ 2 → 1 → N → R. Move the pedal
upward to change the gears as R
→ N → 1
→ 2 → 3. Shut off the throttle completely
when performing gear shift or it will damage
the engine.
WARNING
POTENTIAL HAZARD
Operate the parking brake improperly.
W
HAT CAN HAPPEN
The ATV could start moving unexpectedly if
the parking brake is not applied before start-
ing the engine. This could cause loss of con-
trol or a collision.
If you ride the ATV without releasing the
parking brake, it could cause the brake over-
heat to lose braking performance and cause
an accident.
H
OW TO AVOID THE HAZARD
● Always set the parking brake before start-
ing the engine.
● Always make sure to release the parking
brake before you start to ride.
● Do not change the gear to Reverse be-
fore the ATV stops completely.
24