Specifications

Brakes
1.Brake operation
Test the brakes at slow speed after starting
to make sure they are working properly. If
any of the brakes does not provide proper
braking function, inspect the brake for wear.
(See page 48)
2.Brake pedal and brake levers
Check the correct free play in the brake
pedal and brake levers. Adjust it if the free
play is incorrect. (See page 48)
WARNING
POTENTIAL HAZARD
Failure to check the ATV before operating.
Failure to maintain the ATV properly.
W
HAT CAN HAPPEN
It could cause an accident or equipment
damage.
H
OW TO AVOID THE HAZARD
Always check your ATV carefully each time
before your use it to be sure the ATV is in
safe operation condition.
Always follow inspection and maintenance
procedure as shown in the owner’s manual
28