Operating instructions

13
TUNER FUNCTIONS
Automatic search of FM/AM radio stations
Select FM/AM as source using the SOURCE button.
Select FM-stereo, FM-mono or AM with the FM/AM
button. This is only possible from the remote control.
Press the TUNE button on the right to search up the
radio dial or on the left to search down the radio dial.
(This can also be made from the remote control).
Tuner presets
A total of 20 FM and AM stations can be stored in
memory.
Locate a desired radio station (FM or AM). Open
the memory with the MEMO button on the remote
control.
Select the desired program number with the numeric
buttons on the remote control (0-9, +10).
The program number indicator will blink in the dis-
play.
Press the MEMO button on the remote control to
enter your choise. SAVE OK will be displayed.
The radio station is now saved in the preset memory.
The program number will stop blinking.
Repeat the above procedure to preset other radio
stations.
Locating preset radio stations
Select FM/AM as source using the SOURCE button.
Select FM-stereo, FM-mono or AM with the FM/AM
button. This is only possible from the remote control.
Use the numeric buttons on the remote control to
select the desired program number.
Example: Preset number 8 press button 8
Preset number 18 press +10 and 8.
Display during radio listening
Example of display when FM is tuned to 103,20
MHz.
Example of display when FM is tuned to 103,20
MHz and stored to preset memory number 3.
Example of display when AM is tuned to 1062 KHz.
Example of display when AM is tuned to 1062 KHz
and stored to preset number 11.
or TUNE - TUNE +