User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 105 December 2006
For configuring this table, you can also use the ini file parameters AltRouteCauseTel2IP
and AltRouteCauseIP2Tel (refer to Section 6.5.9 on page 236).
¾ To configure the reasons for alternative routing, take these 5
steps:
1. Open the ‘Reasons for Alternative Routing’ screen (Protocol Management menu >
Routing Tables submenu > Reasons for Alternative Routing option); the ‘Reasons
for Alternative Routing’ screen is displayed.
Figure 5-19: Reasons for Alternative Routing Screen
2. In the ‘IP to Tel Reasons’ table, from the drop-down list select up to four different call
failure reasons that invoke an alternative IP to Tel routing.
3. In the ‘Tel to IP Reasons’ table, from the drop-down list select up to four different call
failure reasons that invoke an alternative Tel to IP routing.
4. Click the Submit button to save your changes.
5. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.