User`s manual

Mediant 1000
H.323 User's Manual 108 Document #: LTRT-83401
5.5.5.2 Tel Profile Settings
Use the Tel Profile Settings screen to define up to four different Tel Profiles. These Profiles
are used in the ‘Trunk Group’ table to associate different Profiles to the gateway’s
channels, thereby applying different behavior to different channels.
You can also configure Tel Profiles using the ini file parameter TelProfile_ID (refer to
Section 6.5.7 on page 226).
¾ To configure the Tel Profile settings, take these 9 steps:
1. Open the ‘Tel Profile Settings’ screen (Protocol Management menu > Profile
Definitions submenu > Tel Profile Settings option); the ‘Tel Profile Settings’ screen
is displayed.
Figure 5-21: Tel Profile Settings Screen
2. In the ‘Profile ID’ drop-down list, select the Tel Profile you want to edit (up to four Tel
Profiles can be configured).