User`s manual

Mediant 1000
H.323 User's Manual 110 Document #: LTRT-83401
5.5.5.3 IP Profile Settings
Use the IP Profile Settings screen to define up to four different IP Profiles. These Profiles
are used in the Tel to IP and IP to Trunk Group Routing tables to associate different
Profiles to routing rules.
You can also configure the IP Profiles using the ini file parameter IPProfile_ID (refer to
Section 6.5.7 on page 226).
¾ To configure the IP Profile settings, take these 9 steps:
1. Open the ‘IP Profile Settings’ screen (Protocol Management menu > Profile
Definitions submenu > IP Profile Settings option); the ‘IP Profile Settings’ screen is
displayed.
Figure 5-22: IP Profile Settings Screen
2. From the ‘Profile ID’ drop-down list, select the IP Profile you want to edit (up to four IP
Profiles can be configured).
3. In the ‘Profile Name’ field, enter a name that enables you to identify the Profile
intuitively and easily.