User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 113 December 2006
Table 5-16: Registration Prefixes Table
Parameter Description
Gatekeeper Registration Prefixes Enter the Gatekeeper Registration prefixes. These prefixes are used
by the VoIP gateway to register to a Gatekeeper.
When entering a prefix, you can create an entry that represents
multiple prefixes using the following notation:
n-m represents a range of numbers. For example, enter ‘250-279’ to
specify all prefixes from 250 to 279.
NPI Select the H.225/Q.931 Number Plan assigned to this entry. You can
select Unknown [0], Private [9] or E.164 Public [1].
The default is Unknown.
Type of Number Select the H.225/Q.931 Number Type assigned to this entry.
Note that the values available for the Number Type column are
determined according to the value selected in the Number Plan
column.
 If you selected Unknown as the Number Plan, you can select
Unknown [0].
 If you selected Private as the Number Plan, you can select
Unknown [0], Level 2 Regional [1], Level 1 Regional [2], PISN
Specific [3] or Level 0 Regional (Local) [4].
 If you selected E.164 Public as the Number Plan, you can select
Unknown [0], International [1], National [2], Network Specific [3],
Subscriber [4] or Abbreviated [6].
The default is Unknown.
For a detailed list of the available NPI/TON values, refer to Section
5.5.3.2 on page 95.
Note: The Type of Number information is used only if the gateway is
configured to register with PartyNumber Prefixes (GwRegistrType =
3 or 4).