User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 129 December 2006
5.6 Advanced Configuration
Use this menu to set the gateway’s advanced configuration parameters.
Note: Parameters contained within square brackets are the names used to
configure the parameters via the ini file.
5.6.1 Configuring the Network Settings
From the Network Settings you can:
 Configure the IP Settings (refer to Section 5.6.1.1 below)
 Configure the Application Settings (refer to Section 5.6.1.2 on page 132)
 Configure the NFS Settings (refer to Section 5.6.1.3 on page 133)
 Configure the IP Routing Table (refer to Section 5.6.1.4 on page 136)
 Configure the VLAN Settings (refer to Section 5.6.1.5 on page 138)
5.6.1.1 Configuring the IP Settings
¾ To configure the IP Settings parameters, take these 4 steps:
1. Open the ‘IP Settings’ screen (Advanced Configuration menu > Network Settings >
IP Settings option); the ‘IP Settings’ screen is displayed.
Figure 5-33: IP Settings Screen