User`s manual

Mediant 1000
H.323 User's Manual 138 Document #: LTRT-83401
5.6.1.5 Configuring the VLAN Settings
For detailed information on the Mediant 1000 VLAN implementation, refer to Section 9.9 on
page 285.
¾ To configure the VLAN Settings parameters, take these 4 steps:
1. Open the ‘VLAN Settings’ screen (Advanced Configuration menu > Network
Settings > VLAN Settings option); the ‘VLAN Settings’ screen is displayed.
Figure 5-37: VLAN Settings Screen
2. Configure the VLAN Settings according to Table 5-26.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.
Table 5-26: Network Settings, VLAN Settings Parameters
Parameter Description
VLAN Mode
[VlanMode]
Sets the VLAN functionality.
Disable [0] (default).
Enable [1].
PassThrough [2] = N/A.
Note: This parameter cannot be changed on-the-fly and requires a
gateway reset.
IP Settings
Native VLAN ID
[VlanNativeVlanID]
Sets the native VLAN identifier (PVID, Port VLAN ID).
The valid range is 1 to 4094. The default value is 1.
OAM VLAN ID
[VlanOamVlanID]
Sets the OAM (Operation, Administration and Management) VLAN
identifier.
The valid range is 1 to 4094. The default value is 1.