User`s manual

Mediant 1000
H.323 User's Manual 160 Document #: LTRT-83401
5.6.6 Regional Settings
The ‘Regional Settings’ screen allows you to define and view the gateway’s internal date
and time as well as to load configuration files (Call Progress Tones, FXS/FXO coefficient,
and CAS) to the gateway. For detailed information on the configuration files, refer to
Section 5.8.2 on page 189.
¾ To configure the date and time of the Mediant 1000, take these 3
steps:
1. Open the ‘Regional Settings’ screen (Advanced Configuration menu > Regional
Settings); the ‘Regional Settings' screen is displayed.
Figure 5-46: Regional Settings Screen
2. Enter the time and date where the gateway is installed.
3. Click the Set Date & Time button; the date and time are automatically updated.
Note: After performing a hardware reset, the date and time are returned to their
defaults and should therefore, be updated.