User`s manual

Mediant 1000
H.323 User's Manual 162 Document #: LTRT-83401
5.6.7 Security Settings
From the Security Settings you can:
 Configure the Web User Accounts (refer to Section 5.6.7.1 below)
 Configure the Web & Telnet Access List (refer to Section 5.6.7.2 on page 163)
 Configure the Firewall Settings (refer to Section 5.6.7.3 on page 164)
 Configure the Certificates (refer to Section 5.6.7.4 on page 167)
 Configure the General Security Settings (refer to Section 5.6.7.5 on page 167)
 Configure the IPSec Table (refer to Section 5.6.7.6 on page 169)
 Configure the IKE Table (refer to Section 5.6.7.7 on page 169)
5.6.7.1 Configuring the Web User Accounts
To prevent unauthorized access to the Embedded Web Server, two user accounts are
available, a primary and secondary. Each account is composed of three attributes:
username, password and access level. For detailed information on the user account
mechanism, refer to Section 5.2.1 on page 55.
It is recommended that you change the default username and password of the account you
use to access the Embedded Web Server.
¾ To change the Web User Accounts attributes, take these 4 steps:
1. Open the ‘Web User Accounts’ screen (Advanced Configuration menu > Security
Settings > Web User Accounts option); the ‘Web User Accounts’ screen is
displayed.
Figure 5-47: Web User Accounts Screen (for Users with ‘Security Administrator’ Privileges)