User`s manual

Mediant 1000
H.323 User's Manual 172 Document #: LTRT-83401
Table 5-36: Management Settings Parameters (continues on pages 171 to 172)
Parameter Description
Device Software Update
[ActivityListToLog = SWU]
cmp loading via the Software Upgrade Wizard.
Access to Restricted Domains
[ActivityListToLog = ARD]
Access to Restricted Domains.
The following screens are restricted:
(1) ini parameters (AdminPage)
(2) General Security Settings
(3) Configuration File
(4) IPSec/IKE tables
(5) Software Upgrade Key
(6) Internal Firewall
(7) Web Access List.
(8) Web User Accounts
Non-Authorized Access
[ActivityListToLog = NAA]
Attempt to access the Embedded Web Server with a false / empty username
or password.
Sensitive Parameters Value
Change
[ActivityListToLog = SPC]
Changes made to sensitive parameters:
(1) IP Address
(2) Subnet Mask
(3) Default Gateway IP Address
(4) ActivityListToLog
5.6.8.1 Configuring the SNMP Managers Table
The SNMP Managers table allows you to configure the attributes of up to five SNMP
managers.
¾ To configure the SNMP Managers Table, take these 5 steps:
1. Access the ‘Management Settings’ screen (Advanced Configuration menu >
Management Settings); the ‘Management Settings’ screen is displayed (Figure 5-51).
2. Open the 'SNMP Managers Table' screen by clicking the arrow sign (-->) to the right of
the SNMP Managers Table label; the 'SNMP Managers Table' screen is displayed
(Figure 5-52).
Figure 5-52: SNMP Managers Table Screen
3. Configure the SNMP Managers parameters according to Table 5-37 on page 173.
4. Click the Submit button to save your changes.
5. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.