User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 175 December 2006
5.6.8.3 Configuring SNMP V3 Users
Use the SNMP V3 Table to configure authentication and privacy for up to 10 SNMP v3
users.
¾ To configure the SNMP v3 users, take the following 6 steps:
1. Access the ‘Management Settings’ screen (Advanced Configuration menu >
Management Settings); the ‘Management Settings’ screen is displayed.
2. Open the 'SNMP V3 Setting' screen by clicking the arrow sign (-->) to the right of the
SNMP V3 Table label; the 'SNMP V3 Setting' screen is displayed (Figure 5-54).
Figure 5-54: SNMP V3 Setting Screen
3. To add an SNMP v3 user, in the 'New Row Index' field, type the desired row index,
and then click Add an Empty Row. A new row appears.
4. Configure the SNMP V3 Setting parameters according to Table 5-39 on page 175.
5. Click the Apply Row Settings button to save your changes.
6. To save the changes so they are available after a hardware reset or power fail, refer to
Section 5.9.2 on page 193.
Notes:
• To delete an SNMP V3 user, select the Index radio button
corresponding to the SNMP V3 user row entry that you want to delete,
and then click the Delete Row button.
• To copy an existing SNMP V3 user configuration to a new row, select
the radio button on the left of the desired SNMP V3 user row. and then
click Copy Selected Row as A New Row. A new row appears that
includes the same configuration as the selected row.
• To sort all row indexes incrementally, click Compact Table.
Table 5-39: SNMP V3 Users Parameters (continues on pages 175 to 176)
Parameter Description
SNMPUsers_Index
[Index]
This is the table index. Its valid range is 0 to 9.
[SNMPUsers_Username]
[Username]
Name of the SNMP v3 user. This name must be unique.
[SNMPUsers_AuthProtocol]
[AuthProtocol]
Authentication protocol to be used for the SNMP v3 user.
0 = none (default)
1 = MD5
2 = SHA-1