User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 195 December 2006
5.9.3 Resetting the Mediant 1000
The 'Maintenance Actions' screen enables you to remotely reset the gateway. Before you
reset the gateway, you can choose the following options:
 Save the gateway's current configuration to the flash memory (non-volatile).
 Perform a graceful shutdown. Reset starts only after a user-defined time expires or no
more active traffic exists (the earliest thereof).
¾ To reset the gateway, take these 6 steps:
1. Open the ‘Maintenance Actions' screen (Maintenance menu); the ‘Maintenance
Actions' screen is displayed.
Figure 5-70: Maintenance Actions Screen
2. Under the RESET group, from the 'Burn To FLASH' drop-down list, select one of the
following options:
• 'Yes': The gateway's current configuration is burned (i.e., saved) to the flash
memory prior to reset (default).
• 'No': Resets the device without burning (i.e., saving) the current configuration to
flash (discards all unsaved modifications to the configuration).
4. Under the RESET group, from the 'Graceful Option' drop-down list, select one of the
following options:
• 'Yes': Reset starts only after the user-defined time in the Shutdown Timeout field
(refer to Step 5) expires or no more active traffic exists (the earliest thereof). In
addition, no new traffic is accepted.
• 'No': Reset starts regardless of traffic and any existing traffic is terminated at
once.