User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 199 December 2006
5.10.1 Monitoring the Mediant 1000 Trunks and Channels
The Home page provides real-time monitoring of the trunks and channels.
¾ To monitor the status of the Mediant 1000 trunks and channel
ports, take this step:
 Open the Home page by clicking the Home icon; the Home page is displayed.
The number of trunks and channels that appear in the screen depends on the system
configuration. The Home page in Figure 5-71 on page 197 depicts a system with one T1
span, an FXO module with three channels, and an FXS module.
The color of each trunk and FXO/FXS channel icon indicates the status of that trunk or
channel. Table 5-45 below describes the color-coding of the trunk and channel icons.
Table 5-45: Trunk and FXO/FXS Channel Status Color Indicators
Trunk/Channel
Status Icon
Trunk (Digital Module) Channel (Analog Module)
Indicator Color Label Description Label Description
Grey
Disable
Trunk not configured (not
in use)
Inactive
Channel is
currently onhook
Green
Active - OK
Trunk synchronized
Call Connected
Active RTP stream
Yellow
RAI Alarm
Remote Alarm Indication
(RAI), also known as the
Yellow Alarm
-- --
Red
LOS/LOF
Alarm
Loss due to LOS (Loss of
Signal) or LOF (Loss of
Frame)
Not Connected
No analog line is
connected to this
port (FXO only)
Blue
AIS Alarm
Alarm Indication Signal
(AIS), also known as the
Blue Alarm
Handset Offhook
Channel is
offhook, but there
is no active RTP
session
Orange
D Channel
Alarm
D-channel alarm -- --
You can drill-down to view a detailed status of each channel pertaining to a trunk or
FXO/FXS port.