User`s manual

Mediant 1000
H.323 User's Manual 204 Document #: LTRT-83401
5.10.6 Viewing Ethernet Port Settings
The 'Ethernet Port Information' screen provides read-only information on the Ethernet
connection used by the Mediant 1000. The Ethernet Port Information parameters are
displayed in Table 5-49. For detailed information on the Ethernet interface configuration,
refer to Section 9.1 on page 279.
¾ To view Ethernet port settings, take this step:
 In the Home page, click the Ethernet port status icon ; the 'Ethernet Port
Information' screen opens.
Figure 5-78: Ethernet Port Information Screen
Table 5-49: Ethernet Port Information Parameters
Parameter Description
Active Port Shows the active Ethernet port (1 or 2).
Port 1 Duplex Mode Shows the Duplex mode Ethernet port 1 is using (Half Duplex or Full Duplex).
Port 1 Speed Shows the speed, in Mbps, that Ethernet port 1 is using (10 Mbps or 100
Mbps).
Port 2 Duplex Mode Shows the Duplex mode Ethernet port 2 is using (Half Duplex or Full Duplex).
Port 2 Speed Shows the speed, in Mbps, that Ethernet port 2 is using (10 Mbps or 100
Mbps).
5.10.7 Assigning a Name or Brief Description to a Port
The Home page allows you to assign an arbitrary name or brief description to the
gateway's ports. This description appears as a tooltip when you move your mouse over the
specific port.
¾ To add a port description, take these 4 steps:
1. Open the Home page by clicking the Home icon.
2. Click the required module port icon; a shortcut menu appears.
3. From the shortcut menu, choose Update Port Info; a text box appears.
4. Type a brief description for the port, and then click Apply Port Info.
Figure 5-79: Entering a Port Name