User`s manual

H.323 User's Manual 6. ini File Configuration of the Mediant 1000
Version 5.0 215 December 2006
Table 6-1: Networking Parameters (continues on pages 212 to 217)
ini File Field Name
Web Parameter Name
Valid Range and Description
EnableNTPasOAM
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for NTP services.
VLAN: Determines the traffic type for NTP services.
1 = OAM (default)
0 = Control.
VLANSendNonTaggedOnN
ative
Specify whether to send non-tagged packets on the native VLAN.
0 = Sends priority tag packets (default).
1 = Sends regular packets (with no VLAN tag).
Multiple IPs Parameters
EnableMultipleIPs
For a description of this parameter, refer to Table 5-22 on page 130.
LocalMediaIPAddress
For a description of this parameter, refer to Table
5-22 on page 130.
LocalMediaSubnetMask
For a description of this parameter, refer to Table 5-22 on page 130.
LocalMediaDefaultGW
For a description of this parameter, refer to Table 5-22 on page 130.
LocalControlIPAddress
For a description of this parameter, refer to Table 5-22 on page 130.
LocalControlSubnetMask
For a description of this parameter, refer to Table 5-22 on page 130.
LocalControlDefaultGW
For a description of this parameter, refer to Table 5-22 on page 130.
LocalOAMIPAddress
For a description of this parameter, refer to Table 5-22 on page 130.
LocalOAMSubnetMask
For a description of this parameter, refer to Table 5-22 on page 130.
LocalOAMDefaultGW
For a description of this parameter, refer to Table 5-22 on page 130.
PPPoE Parameters
EnablePPPoE
Enables the PPPoE (Point-to-Point Protocol over Ethernet) feature.
0 = Disable (default)
1 = Enable