User`s manual

Mediant 1000
H.323 User's Manual 218 Document #: LTRT-83401
Table 6-2: System Parameters (continues on pages 217 to 221)
ini File Field Name
Web Parameter Name
Valid Range and Description
ActivityListToLog
The Activity Log mechanism enables the gateway to send log messages (to a
Syslog server) that report certain types of web actions according to a pre-
defined filter.
The following filters are available:
PVC (Parameters Value Change) - Changes made on-the-fly to parameters.
AFL (Auxiliary Files Loading) - Loading of auxiliary files (e.g., via Certificate
screen).
DR (Device Reset) - Device reset via the Maintenance screen.
FB (Flash Memory Burning) - Burning of files / parameters to flash (e.g.,
Maintenance screen).
SWU (Device Software Update) - cmp loading via the Software Upgrade
Wizard.
ARD (Access to Restricted Domains) - Access to Restricted Domains.
The following screens are restricted:
(1) ini parameters (AdminPage)
(2) General Security Settings
(3) Configuration File
(4) IPSec/IKE tables
(5) Software Upgrade Key
(6) Internal Firewall
(7) Web Access List.
(8) Web User Accounts
NAA (Non Authorized Access) - Attempt to access the Embedded Web Server
with a false / empty username or password.
SPC (Sensitive Parameters Value Change) - Changes made to sensitive
parameters:
(1) IP Address
(2) Subnet Mask
(3) Default Gateway IP Address
(4) ActivityListToLog
For example:
ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard', 'naa', 'spc'.
For configuring the Activity types to report using Activity Log messages, refer to
Section
5.6.8 on page 170.
ECHybridLoss
Sets the four wire to two wire worst case Hybrid loss, the ratio between the
signal level sent to the hybrid and the echo level returning from the hybrid.
0 = 6 dB (default)
1 = 9 dB
2 = 0 dB
3 = 3 dB
GwDebugLevel
For a description of this parameter, refer to Table 5-7 on page 80.
CDRReportLevel
For a description of this parameter, refer to Table 5-7 on page 80.
CDRSyslogServerIP
For a description of this parameter, refer to Table 5-7 on page 80.
HeartBeatDestIP
Destination IP address (in dotted format notation) to which the gateway sends
proprietary UDP ‘ping’ packets.
The default IP address is 0.0.0.0.
HeartBeatDestPort
Destination UDP port to which the heartbeat packets are sent.
The range is 0 to 64000.
The default is 0.
HeartBeatIntervalmsec
Delay (in msec) between consecutive heartbeat packets.
10 = 100000.
-1 = disabled (default).
EnableRAI
For a description of this parameter, refer to Table 5-4 on page 70.
RAIHighThreshold
For a description of this parameter, refer to Table 5-4 on page 70.