User`s manual
H.323 User's Manual 6. ini File Configuration of the Mediant 1000
Version 5.0 219 December 2006
Table 6-2: System Parameters (continues on pages 217 to 221)
ini File Field Name
Web Parameter Name
Valid Range and Description
RAILowThreshold
For a description of this parameter, refer to Table 5-4 on page 70.
RAILoopTime
For a description of this parameter, refer to Table 5-4 on page 70.
Disconnect Supervision Parameters
DisconnectOnBrokenConn
ection
For a description of this parameter, refer to Table
5-7 on page 80.
BrokenConnectionEventTi
meout
For a description of this parameter, refer to Table 5-7 on page 80.
EnableSilenceDisconnect
For a description of this parameter, refer to Table
5-7 on page 80.
FarEndDisconnectSilenceP
eriod
For a description of this parameter, refer to Table
5-7 on page 80.
FarEndDisconnectSilence
Method
For a description of this parameter, refer to Table 5-7 on page 80.
FarEndDisconnectSilenceT
hreshold
Threshold of the packet count (in percents), below which is considered silence
by the media gateway.
The valid range is 1 to 100. The default is 8%.
Note: Applicable only if silence is detected according to packet count
(FarEndDisconnectSilenceMethod = 1).
Automatic Update Parameters
CmpFileURL
Specifies the name of the cmp file and the location of the server (IP address or
FQDN) from which the gateway loads a new cmp file and updates itself. The
cmp file can be loaded using: HTTP, HTTPS, FTP, FTPS or NFS.
For example: http://192.168.0.1/filename
Note 1: When this parameter is set in the ini file, the gateway always loads the
cmp file after it is reset.
Note 2: The cmp file is validated before it is burned to flash. The checksum of
the cmp file is also compared to the previously-burnt checksum to avoid
unnecessary resets.
Note 3: The maximum length of the URL addres is 99 characters.
IniFileURL
Specifies the name of the ini file and the location of the server (IP address or
FQDN) from which the gateway loads the ini file. The ini file can be loaded
using: HTTP, HTTPS, FTP, FTPS or NFS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<username>:<password>@<IP address>/<file name>
Note 1: When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently-dated ini files are loaded.
Note 2: The optional string ‘<MAC>’ is replaced with the gateway’s MAC
address. Therefore, the gateway requests an ini file name that contains its MAC
address. This option enables loading different configurations for specific
gateways.
Note 3: The maximum length of the URL addres is 99 characters.
PrtFileURL
Specifies the name of the Prerecorded Tones file and the location of the server
(IP address or FQDN) from which it is loaded.
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL addres is 99 characters.
CptFileURL
Specifies the name of the CPT file and the location of the server (IP address or
FQDN) from which it is loaded.
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL addres is 99 characters.
FXSCoeffFileURL
Specifies the name of the FXS coefficients file and the location of the server (IP
address or FQDN) from which it is loaded.
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL addres is 99 characters.