User`s manual

H.323 User's Manual 6. ini File Configuration of the Mediant 1000
Version 5.0 225 December 2006
Table 6-5: RADIUS Parameter (continues on pages 224 to 225)
ini File Field Name
Web Parameter Name
Valid Range and Description
RadiusLocalCacheTimeout
For a description of this parameter, refer to Table 5-35 on page 168.
RadiusVSAVendorID
For a description of this parameter, refer to Table 5-35 on page 168.
RadiusVSAAccessAttribute
For a description of this parameter, refer to Table 5-35 on page 168.
6.5.6 SNMP Parameters
Table 6-6: SNMP Parameters (continues on pages 225 to 226)
ini File Field Name
Web Parameter Name
Valid Range and Description
DisableSNMP
For a description of this parameter, refer to Table 5-36 on page 171.
SNMPPort
The device’s local UDP port used for SNMP Get/Set commands.
The range is 100 to 3999.
The default port is 161.
SNMPTrustedMGR_x
Up to five IP addresses of remote trusted SNMP managers from which the
SNMP agent accepts and processes get and set requests.
Note 1: If no values are assigned to these parameters any manager can
access the device.
Note 2: Trusted managers can work with all community strings.
AlarmHistoryTableMaxSize
Determines the maximum number of rows in the Alarm History table.
The parameter can be controlled by the Config Global Entry Limit MIB
(located in the Notification Log MIB).
The valid range is 50 to 1000. The default value is 500.
SNMP Trap Parameters
SNMPManagerTableIP_x
For a description of this parameter, refer to Table 5-37 on page 173.
SNMPManagerTrapPort_x
For a description of this parameter, refer to Table 5-37 on page 173.
SNMPManagerTrapUser_x
This parameter can be set to the name of any configured SNMPV3 user to
associate with this trap destination. This determines the trap format,
authentication level, and encryption level. By default, the trap is
associated with the SNMP trap community string.
SNMPManagerIsUsed_x
For a description of this parameter, refer to Table 5-37 on page 173.
SNMPManagerTrapSendingEnable
_x
For a description of this parameter, refer to Table 5-37 on page 173.
SNMPTrapManagerHostName
For a description of this parameter, refer to Table 5-36 on page 171.
SNMP Community String Parameters
SNMPReadOnlyCommunityString
_x
For a description of this parameter, refer to Table
5-38 on page 174.
SNMPReadWriteCommunityString
_x
For a description of this parameter, refer to Table
5-38 on page 174.
SNMPTrapCommunityString
For a description of this parameter, refer to Table 5-38 on page 174.
SNMP v3 Users Parameters
SNMPUsers_Index
For a description of this parameter, refer to Table
5-39 on page 175.
SNMPUsers_Username
For a description of this parameter, refer to Table 5-39 on page 175.
SNMPUsers_AuthProtocol
For a description of this parameter, refer to Table
5-39 on page 175.
SNMPUsers_PrivProtocol
For a description of this parameter, refer to Table 5-39 on page 175.