User`s manual

Mediant 1000
H.323 User's Manual 244 Document #: LTRT-83401
Table 6-10: Number Manipulation and Routing Parameters (continues on pages 240 to 246)
ini File Field Name
Web Parameter Name
Valid Range and Description
SourceNumberMapTel2IP
Configures the Source Phone Number Manipulation Table for TelÆIP calls.
SourceNumberMapTel2IP = a,b,c,d,e,f,g,h
a = Source number prefix
b = Number of stripped digits from the left, or (if in brackets are used) from
right. A combination of both options is allowed.
c = String to add as prefix, or (if in brackets are used) as suffix. A
combination of both options is allowed.
d = Number of remaining digits from the right
e = H.225/Q.931 Number Plan
f = H.225/Q.931 Number Type
g =Destination number prefix
h =Calling number presentation (0 to allow presentation, 1 to restrict
presentation)
The ‘b’ to ‘f’ and ‘h’ manipulation rules are applied if the called and calling
numbers match the ‘a’ and ‘g’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign ‘$$’, for example:
SourceNumberMapTel2IP=01,2,972,$$,0,0,$$,1
SourceNumberMapTel2IP=03,(2),667,$$,0,0,22,0
SourceNumberMapIP2Tel
Manipulate the source number for IP to Tel calls.
SourceNumberMapIP2Tel = a,b,c,d,e,f,g,h,i
a = Source number prefix
b = Number of stripped digits from the left, or (if brackets are used) from the
right. A combination of both options is allowed.
c = String to add as prefix, or (if brackets are used) as suffix. A combination
of both options is allowed.
d = Number of remaining digits from the right
e = Q.931 Number Plan
f = Q.931 Number Type
g = Destination number prefix
h =Calling number presentation (0 to allow presentation, 1 to restrict
presentation)
I = Source IP address
The ‘b’ to ‘f’ and ‘h’ manipulation rules are applied if the called and calling
numbers match the ‘a’, ‘g’ and ‘I’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign ‘$$’, for example:
SourceNumberMapIP2Tel =01,2,972,$$,0,$$,034,1
SourceNumberMapIP2Tel =03,(2),667,$$,$$,0,22
Note: The Source IP address can include the ‘x’ wildcard to represent single
digits. For example: 10.8.8.xx represents all the addresses between 10.8.8.10
to 10.8.8.99. The ‘*’ wildcard represents any number between 0 and 255, e.g.
10.8.8.* represents all the addresses between 10.8.8.0 and 10.8.8.255.