User`s manual

Mediant 1000
H.323 User's Manual 248 Document #: LTRT-83401
Table 6-11: E1/T1/J1 Configuration Parameters (continues on pages 246 to 248)
ini File Field Name
Web Parameter Name
Valid Range and Description
ISDNIBehavior_x
Same as the description for parameter ISDNIBehavior, but for a specific trunk
ID.
ISDNInCallsBehavior_x
Same as the description for parameter ISDNInCallsBehavior, for a specific trunk
ID.
ISDNOutCallsBehavior_x
Same as the description for parameter ISDNOutCallsBehavior, but for a specific
trunk ID.
6.5.12 Channel Parameters
The Channel Parameters define the DTMF, fax and modem transfer modes. Refer to
Section 8.3 on page 261 for a detailed description of fax and modem transfer modes; refer
to Section 8.2 on page 260 for detailed description on DTMF transport modes.
Table 6-12: Channel Parameters (continues on pages 248 to 250)
ini File Field Name
Web Parameter Name
Valid Range and Description
DJBufMinDelay
For a description of this parameter, refer to Table 5-29 on page 146.
DJBufOptFactor
For a description of this parameter, refer to Table 5-29 on page 146.
FaxTransportMode
For a description of this parameter, refer to Table 5-28 on page 142.
FaxRelayEnhancedRedundancy
Depth
For a description of this parameter, refer to Table
5-28 on page 142.
FaxRelayRedundancyDepth
For a description of this parameter, refer to Table 5-28 on page 142.
FaxRelayMaxRate
For a description of this parameter, refer to Table 5-28 on page 142.
FaxRelayECMEnable
For a description of this parameter, refer to Table 5-28 on page 142.
FaxModemBypassCoderType
For a description of this parameter, refer to Table
5-28 on page 142.
CNGDetectorMode
For a description of this parameter, refer to Table 5-28 on page 142.
FaxModemBypassM
For a description of this parameter, refer to Table
5-28 on page 142.
FaxBypassPayloadType
For a description of this parameter, refer to Table
5-29 on page 146.
ModemBypassPayloadType
Modem Bypass dynamic payload type (range 0-127).
The default value is 103.
FaxModemRelayVolume
-18 to -3, corresponding to -18 dBm to -3 dBm in 1 dB steps. (Default = -12
dBm) fax gain control.
DetFaxOnAnswerTone
For a description of this parameter, refer to Table
5-3 on page 64.
FaxModemBypassBasicRTPPac
ketInterval
Determines the basic frame size that is used during fax / modem bypass
sessions.
0 = set internally (default)
1 = 5 msec (not recommended)
2 = 10 msec
3 = 20 msec
Note: When set for 5 msec (1), the maximum number of simultaneous
channels supported is 120.
FaxModemBypassDJBufMinDela
y
0 to 150 msec (default=40)
Determines the Jitter Buffer delay during fax and modem bypass session