User`s manual

H.323 User's Manual 6. ini File Configuration of the Mediant 1000
Version 5.0 251 December 2006
6.5.13 Configuration Files Parameters
The configuration files (Call Progress Tones, Prerecorded Tones, User Information,
FXS/FXO Coefficient, and CAS) can be loaded to the Mediant 1000 using the Embedded
Web Server or a TFTP session (refer to Section 5.8.2 on page 189). Before you load them
to the gateway, in the ini file, you need to specify the files that you want loaded and
whether they must be stored in the non-volatile memory. The table below lists the ini file
parameters associated with these configuration files:
Table 6-13: Configuration Files Parameters
ini File Field Name
Valid Range and Description
CallProgressTonesFilename
The name of the file containing the Call Progress Tones definitions. Refer to
Section
16.1 on page 367 for additional information on how to create and load
this file.
FXSLoopCharacteristicsFileN
ame
The name (and path) of the file providing the FXS line characteristic
parameters.
FXOLoopCharacteristicsFileN
ame
The name (and path) of the file providing the FXO line characteristic
parameters.
CASFileName
This is the name of the file containing specific CAS protocol definition (such as
‘E_M_WinkTable.dat’). These files are provided to support various types of
CAS signaling.
CASFileName_x
CAS file name (e.g., ‘E_M_WinkTable.dat’) that defines the CAS protocol. It is
possible to define up to eight different CAS files by repeating this parameter.
Each CAS file can be associated with one or more of the gateway trunks using
the parameter CASTableIndex_x.
CASTablesNum
Number, 1 to 8. Specifies how many CAS configuration files are loaded.
PrerecordedTonesFileName
The name (and path) of the file containing the Prerecorded Tones.
SaveConfiguration
Determines if the gateway’s configuration (parameters and files) is saved to
flash (non-volatile memory).
0 = Configuration isn’t saved to flash memory.
1 = Configuration is saved to flash memory (default).