User`s manual

Mediant 1000
H.323 User's Manual 310 Document #: LTRT-83401
5. Click the Send File button; the file is sent to the device. When loading is complete, the
screen is automatically refreshed and the new background image is displayed.
6. To save the image to flash memory so it is available after a power fail, refer to Section
5.9.2 on page 193.
The new background appears on all Web Interface screens.
Tip 1: If you encounter any problem during the loading of the files, or you want to
restore the default images, click the Restore Default Images button.
Tip 2: When replacing both the background image and the logo image, first load
the logo image followed by the background image.
¾ To replace the background image via the ini file, take these 2
steps:
1. Place your background image file in the same folder as where the device’s ini file is
located (i.e., the same location defined in the BootP/TFTP configuration utility). For
detailed information on the BootP/TFTP, refer to Appendix C on page 381.
2. Add/modify the ini file parameters in Table 11-5 according to the procedure described
in Section 6.2 on page 209.
Note: Loading the device’s ini file using the ‘Configuration File’ screen in the Web
interface doesn’t load the logo image file.
Table 11-5: Customizable Logo ini File Parameters
Parameter Description
BkgImageFileName
The name (and path) of the file containing the new background.
Use a gif, jpg or jpeg image file.
The default is AudioCodes background file.
Note: The length of the name of the image file is limited to 47 characters.
11.6.3 Customizing the Product Name
The Product Name text string can be modified according to OEMs specific requirements.
 To replace AudioCodes’ default product name with a text string via the Web Interface,
modify the two ini file parameters in Table 11-6 according to the procedure described
in Section 11.6.4 on page 311.
 To replace AudioCodes’ default product name with a text string via the ini file,
add/modify the two ini file parameters in Table 11-6 according to the procedure
described in Section 6.2 on page 209.
Table 11-6: Web Appearance Customizable ini File Parameters
Parameter Description
UseProductName
0 = Don’t change the product name (default).
1 = Enable product name change.
UserProductName
Text string that replaces the product name.
The default is ‘Mediant 1000’.
The string can be up to 29 characters.