User`s manual

H.323 User's Manual 11. Advanced System Capabilities
Version 5.0 313 December 2006
11.7.3 Loading the Software Upgrade Key Using the Embedded Web
Server
¾ To load a Software Upgrade Key using the Web Server, take these
6 steps:
1. Access the devices Embedded Web Server (refer to Section 5.3 on page 57).
2. Click the Software Update button.
3. Click the Software Upgrade Key tab; the Software Upgrade Key screen is displayed
(shown in Figure 11-9).
Figure 11-9: Software Upgrade Key Screen
4. When loading a single key S/N line to a device:
a. Open the Software Upgrade Key file (using for example, Notepad).
b. Copy the key string of the device’s S/N, and then paste it into the field 'New Key'.
If the string is sent in the body of an email, copy and paste it from there.
c. Click the Add Key button.
5. When loading a Software Upgrade Key text file containing multiple S/N lines to a
device (refer to Figure 11-10):
a. In the 'Send “Upgrade Key” file from your computer to the device' field, click the
Browse button, and then navigate to the Software Upgrade Key text file.
b. Click the Send File button.
The new key is loaded to the device, validated, and if valid is burned to memory. The
new key is displayed in the 'Current Key' field.
Validate the new key by scrolling through the ‘Key features’ panel, verifying the
presence of the appropriate features.