User`s manual

H.323 User's Manual 13. Security
Version 5.0 325 December 2006
Figure 13-2: Example of an IKE Table
[IPSec_IKEDB_Table]
Format IKE_DB_INDEX = IKEPolicySharedKey, IKEPolicyProposalEncryption_0,
IKEPolicypRoposalAuthentication_0, IKEPolicyProposalDHGroup_0,
IKEPolicyProposalEncryption_1, IKEPolicypRoposalAuthentication_1,
IKEPolicyProposalDHGroup_1, IKEPolicyLifeInSec, IkePolicyAuthenticationMethod;
IPSEC_IKEDB_TABLE 0 = 123456789, 1, 2, 0, 2, 2, 1, 28800, 0;
[\IPSEC_IKEDB_TABLE]
In the example above, a single IKE peer is configured and a Pre-shared key authentication
is selected. Its pre-shared key is 123456789. Two security proposals are configured:
DES/SHA1/786DH and 3DES/SHA1/1024DH.
¾ To configure the IKE table using the Embedded Web Server, take
these 6 steps:
1. Access the Embedded Web Server (refer to Section 5.3 on page 57).
2. Open the ‘IKE Table’ screen (Advanced Configuration menu > Security Settings >
IKE Table option); the ‘IKE Table’ screen is displayed.
Figure 13-3: IKE Table Screen
3. In the ‘Policy Index’ drop-down list, select the peer you want to edit (up to 20 peers
can be configured).