User`s manual

Mediant 1000
H.323 User's Manual 350 Document #: LTRT-83401
 RTCP-XR: This MIB (RFC) implements the following partial support:
• The rtcpXrCallQualityTable is fully supported.
• In the rtcpXrHistoryTable, support of the RCQ objects is provided only with no
more than 3 intervals, 15 minutes long each.
• Supports the rtcpXrVoipThresholdViolation trap.
 ds1 MIB: support for the following:
• dsx1ConfigTable - partial supports following objects have SET and GET applied:
♦ dsx1LineCoding
♦ dsx1LoopbackConfig
♦ dsx1LineStatusChangeTrapEnable
♦ dsx1CircuitIdentifier
All other objects in this table support GET only:
• dsx1CurrentTable
• dsx1IntervalTable
• dsx1TotalTable
• dsx1LineStatusChange trap
 ipForward MIB: (RFC 2096) fully supported
In addition to the standard MIBs, the complete product series contains proprietary MIBs:
 AC-TYPES MIB: lists the known types defined by the complete product series. This is
referred to by the sysObjectID object in the MIB-II.
Note: The acBoard MIB is still supported but is being replaced by five newer
proprietary MIBs. The only relevant section in this MIB is the trap sub-tree
acTrap.
As noted above, five new MIBs cover the device’s general parameters. Each contains
a Configuration subtree for configuring related parameters. In some, there also are
Status and Action subtrees.
The five MIBs are:
 AC-CONTROL-MIB
 AC-MEDIA-MIB
 AC-PSTN-MIB
 AC-SYSTEM-MIB
 AC-SS7-MIB
 acGateway MIB: This proprietary MIB contains objects related to configuration of the
device when applied as a SIP or H.323 media gateway only. This MIB complements
the other proprietary MIBs.
The acGateway MIB has the following groups:
• Common - for parameters common to both SIP and H.323
• SIP - for SIP parameters only
• H.323 - for H.323 parameters only
 acAtm: This proprietary MIB contains objects related to configuration and status of the
device when applied as an ATM media gateway only. This MIB complements the other
proprietary MIBs.
The acAtm MIB has the following groups:
• acAtmConfiguration: for configuring ATM related parameters
• acAtmStatus: for the status of ATM connections