User`s manual

Mediant 1000
H.323 User's Manual 358 Document #: LTRT-83401
¾ To delete the read-only, noAuthNoPriv SNMPv3 user (v3user), take
these 3 steps:
1. If v3 user is associated with a trap destination, follow the procedure for associating a
different user to that trap destination. (See below.)
2. Delete the vacmSecurityToGroupTable row for SecurityName v3user, GroupName
ReadGroup1, and SecurityModel usm.
3. Delete the row in the usmUserTable for v3user.
¾ To add a read-write, authPriv SNMPv3 user (v3user), take these 4
steps:
1. Clone the row with the same security level.
2. Change the authentication key and privacy key.
3. Activate the row. That is, set the row status to active(1).
4. Add a row to the vacmSecurityToGroupTable for SecurityName v3admin1,
GroupName ReadWriteGroup3, and SecurityModel usm(3).
Note: A row with the same security level (authPriv) must already exist in the
usmUserTable (see the usmUserTable for details).
¾ To delete the read-write, authPriv SNMPv3 user (v3admin1), take
these 3 steps:
1. If v3admin1 is associated with a trap destination, follow the procedure for associating
a different user to that trap destination. (See below.)
2. Delete the vacmSecurityToGroupTable row for SecurityName v3admin1, GroupName
ReadWriteGroup1, and SecurityModel usm.
3. Delete the row in the usmUserTable for v3admin1.