User`s manual

Mediant 1000
H.323 User's Manual 388 Document #: LTRT-83401
3. Click Apply to save this entry to the list of clients, or click Apply & Reset to save this
entry to the list of clients and send a reset message to that gateway to immediately
implement the settings.
Note: To use Apply & Reset you must enable ARP Manipulation in the Preferences
window. Also, you must have administrator privileges for the computer you are using.
An easy way to create several clients that use similar settings is to create a template. For
information on how to create a template, refer to Section C.12 on page 392.
¾ To add a client to the list using a template, take these 5 steps:
1. Click the Add New Client icon
; a client with blank parameters is displayed.
2. In the field Template, located on the right side of the Client Configuration Window,
click on the down arrow to the right of the entry field and select the template that you
want to use.
3. The values provided by the template are automatically entered into the parameter
fields on the right side of the Client Configuration Window. To use the template
parameters, leave the check box next to that parameter selected. The parameter
values appear in gray text.
4. To change a parameter to a different value, unselect the check box to the right of that
parameter. This clears the parameter provided by the template and enables you to
edit the entry. Clicking the check box again restores the template settings.
5. Click Apply to save this entry to the list of clients or click Apply & Reset to save this
entry to the list of clients and send a reset message to that gateway to immediately
implement the settings.
Note: To use Apply & Reset you must enable ARP Manipulation in the Preferences
window. Also, you must have administrator privileges for the computer you are using.
C.11.2 Deleting Clients
¾ To delete a client from the BootP Tool, take these 3 steps:
1. Select the client that you wish to delete by clicking on the line in the window for that
client.
2. Click the Delete Current Client button
; a warning pops up.
3. To delete the client, click Yes.
C.11.3 Editing Client Parameters
¾ To edit the parameters for an existing client, take these 4 steps:
1. Select the client that you wish to edit by clicking on the line in the window for that
client.
2. Parameters for that client display in the parameter fields on the right side of the
window.
3. Make the changes required for each parameter.
4. Click Apply to save the changes, or click Apply & Reset to save the changes and
send a reset message to that gateway to immediately implement the settings.
Note: To use Apply & Reset you must enable ARP Manipulation in the Preferences
window. Also, you must have administrator privileges for the computer you are using.