User`s manual

Mediant 1000
H.323 User's Manual 396 Document #: LTRT-83401
E.1.1 Converting a CPT ini File to a Binary dat File
For detailed information on creating a CPT ini file, refer to Section 16.1 on page 367.
¾ To convert a CPT ini file to a binary dat file, take these 10 steps:
1. Execute the TrunkPack Downloadable Conversion Utility, DConvert.exe (supplied with
the software package); the utility’s main screen opens (shown in Figure E-1).
2. Click the Process Call Progress Tones File(s) button; the ‘Call Progress Tones’
screen, shown in Figure E-2, opens.
Figure E-2: Call Progress Tones Conversion Screen
3. Click the Select File… button that is in the ‘Call Progress Tone File’ box.
4. Navigate to the folder that contains the CPT ini file you want to convert.
5. Click the ini file and click the Open button; the name and path of both the ini file and
the (output) dat file appears in the fields below the Select File button.
6. Enter the Vendor Name, Version Number and Version Description in the
corresponding required fields under the ‘User Data’ section.
• The maximum length of the Vendor field is 256 characters.
• The format of the Version field is composed of two integers separated by a period
‘.’ (e.g., 1.2, 23.4, 5.22).
• The maximum length of the Version Description field is 256 characters.
7. The default value of the CPT Version drop-down list is Version 3. Do one of the
following:
• If the software version you are using is prior to version 4.4, select Version 1 (to
maintain backward compatibility).
• If the software version you are using is 4.4, select Version 2.
• Otherwise, leave the value at its default.
8. Check the ‘Use dBm units for Tone Levels’ check box. Note that the levels of the Call
Progress Tones (in the CPT file) must be in -dBm units.
9. Click the Make File button; you’re prompted that the operation (conversion) was
successful.
10. Close the application.